## 5 September 2023

A series circuit is a closed circuit where the current follows one path as opposed to a parallel circuit dividing the circuit into two or more paths. The current through each load is the same in a series circuit and the total voltage throughout the circuit is the sum of the voltages throughout each load.

The advantages of the series circuit are it is a simple design, has predictable current flow, and is useful in voltage dividers, safety, and Uniform brightness in series-connected bulbs. The disadvantages of a Series circuit are it is voltage drop, cumulative resistance, One component failure that affects the entire circuit, limited applications, and inefficient power distribution.  Some advantages and disadvantages of series circuits are discussed below. So let us check out the advantages and disadvantages of the sensor to know more about the series circuit.

## Advantages of a series circuit :

• They provide more voltage with a higher output.
• Their simple design
• It is easy to understand
• The series circuit does not overheat easily.
• It is easy to calculate and predict the current in the circuit.
• In a series circuit, the current must pass through each element in the circuit.
• Series circuits are commonly used in voltage divider circuits.
• If one component fails in a series circuit, it does not necessarily disrupt the entire circuit.
• Series circuits are used to connect bulbs in strings, and the same current flows through each bulb, ensuring uniform brightness.

## Disadvantages of a series circuit :

• If one point breaks in the series circuit the total circuit will break.
• The resistance of a circuit increases with circuit complexity.
• Series circuit, the total voltage across the circuit is divided among the components.
• It can lead to high overall resistance in the circuit, resulting in reduced current flow and potential voltage drop.
• Series circuits are not suitable for all applications.
• If one component fails, it breaks the circuit and all components downstream from the failed component cease to function.
• In power distribution systems, series circuits are inefficient because of voltage drop issues.