Search This Blog

8 March 2023

Advantages of ARM Processor

The Advanced RISC Machine (ARM) microcontroller was created by the Acorn computer company and is currently produced by a number of companies, including Apple, Nvidia, Qualcomm, Motorola, ST Microelectronics, Samsung Electronics, and TI. It is a microcontroller, also known as an advanced RISC microcontroller, that is built on the RISC instruction set architecture (ISA). It is the most popular microcontroller and is used by most industries for embedded systems due to its wide range of features and suitability for producing products with good aesthetics. Let us have a look at the advantages of ARM processors.

Learn more about PIC Vs ARM

Here are the listed of top 7 Advantages of ARM processor

  1. Affordable to create
  2. Better battery life
  3. Load store architecture
  4. Simple Circuits
  5. Lower power consumption
  6. Work faster
  7. Multiprocessing feature

Let us have a look at the Advantages of ARM processors and these are as follows:

Affordable to create

The ARM processor is very cost-effective to produce because it does not require expensive machinery. It is produced for a much lower cost when compared to other processors. They are therefore suitable for producing inexpensive mobile phones and other electronics.

Better Battery Life

The battery life of the ARM processor is better. This is evident when managing both ARM-based and non-ARM-based devices. Those who worked on ARM processors put in more hours and were let go later than those who did not.

Load Store architecture

The processor uses a load-store architecture that stores data in a number of registers(to reduce memory interactions). To move data from external memory to the register bank, it has separate load and store instructions.

Simple circuits

Because ARM processors have simple circuits, they can fit into smaller devices and are very compact. 

Lower power consumption

AMP processors use less energy. Initially, they were intended to operate at lower power. Even so, their architecture uses fewer transistors. They also have other characteristics that make this possible.

Work faster

ARM only performs one operation at a time. This quickens the procedure. It responds more quickly because of its lower latency.

Multiprocessing feature

A multiprocessing system's ability to use multiple processors to process data. ARM processors are built to work with multiprocessing systems. In addition to its hardware, the ARMv6K, the first AMP processor, could support four CPUs.

Thank you for reading this article. Still, if you have any questions or queries in your mind on the Advantages of ARM Processor then please ask us in the comment section below.

Explore more information:

  1. AVR Vs ARM 


Posted by on