Some precautions of cleat wiring include:
- Cleat wiring is not suitable for those place where smoke, steam, dust, and risk mechanical injury is present.
- The cable is lying straight in cleats.
- Do not install this wiring in as specially for stores and flammable places.
- The cap is not tightly screwed on the base because of cable is damaged and not as loosely screw that as a result, the cable is producing sag.
- If the cable is passing through under the water pipes, wall or roofs then cables are always passing through met conduits.
- Switches, sockets, cut out, ceiling rose and lamp holders are always installed on round wooden blocks.
- The distance between branch circuits for single-phase supply is not less than 2.5 cm and for sub-main 4cm minimum.
- Always use the wooden bushing on each end of the conduit circuit.