Difference Between Transmission and Distribution Line

The transmission and distribution line both are used to carry power from one place to the other. difference between transmission and distribution lines is explained on the basis of the factors like the basic like usage of the transmission line and distribution line, their working supply phase, voltage, and level of conduction.

Definition of transmission line:

The transmission line is for large distances, their voltage is higher, and they can transport more electricity.

Definition of distribution line:

The distribution line is for short distances, their voltages are lower, and they transport electricity locally.

Difference between transmission and distribution lines:

  • The distribution line is thin as compared to the transmission line.
  • The transmission line conducts current at 69 kilovolts or more, but the distribution line conducts current at less than 69 kilovolts.
  • The transmission line carries power or electricity in a three-phase supply system. Distribution systems require a single-phase supply system for carrying electricity.
  • The transmission line carries electricity at a very high voltage about 11000 volts whereas the distribution line carries electricity at a very low and safe value level that is about 220 volts.
  • The transmission line help in the movement of electricity from a power plant or power station to the various substations whereas the distribution line carries electricity from the substation to the consumer end to the residential and commercial customers.

Explore more information:
  1. Difference  between AC and DC transmission line

Difference Between Inverting and Non-Inverting Amplifier

The major difference of operational amplifiers is the inverting and non-inverting amplifiers that the inverting amplifier is the one that produces an amplified output signal which is out of phase to the applied input. While in non-inverting amplifies the input signal level without changing the phase of the signal at the output.


Definition of inverting amplifier:

A type of op-amp that is designed to generate a signal at the output which is 180 degrees out of the phase with the applied input is known as the inverting amplifier. This implies that if the phase of the applied input signal is positive then the amplified signal will be in a negative phase. In a similar way for a signal with a negative phase, the phase of the output will be positive.

Definition of non- inverting amplifier:

An amplifier that produces an amplified signal at the output, having a similar phase as that of the applied input is known as the non-inverting amplifier. This simply means that for an input signal with the positive phase, the output will also be positive.


Difference between Inverting and non-inverting amplifier:


  • The gain provided by the inverting amplifier is the ratio of the resistances, while in a gain of the non-inverting amplifier is the summation of 1 ad ratio of the resistance.
  • The input signal in the inverting amplifier is applied at the negative terminal of the op-amp, while in input in case of a non-inverting amplifier is provided at the positive terminals.
  • In the inverting amplifier, the non-inverting terminal is grounded, while in the non-inverting amplifier, the inverting terminal of the op-amp is grounded.
  • The key factor of differentiation between inverting and non-inverting amplifier is done on the basis of the phase relationship existing between input and output. In the case of the non-inverting amplifier, both input and output are in the same phase.
  • The achieved gain of the inverting amplifier is negative thus it provides an inverted output, But the non-inverting amplifier, the gain is positive, and hence the achieved output is non-inverted in nature.

Explore more information:

WWW full form

What is the full form of WWW?


Answer:

  • World Wide Web

What does WWW mean?


WWW is also called the web and it is a catalog of an order of all websites connected to the worldwide internet. It is an information system in which linked hypertext data and resources are accessed over the internet. Using a web browser, a user can access a web page and a user can navigate between the web page using hyperlinks where images, texts, and other multimedia data and content can be carried on a website page.

HTML full form

What is the full form of HTML?


Answer:

  • Hypertext Markup Language

What does HTML mean?


HTML is a standard markup language used to design the document that will be displayed in the browsers as a web page. This language can become more interactive and attractive by using the CSS and JS within it. The HTML world defines some specific meaning within it. Hypertext comes from the hyperlink which means connections between several pages, and the markup means the defined elements will be the page layout and elements within the page. The language combines both the features and makes it hypertext markup language.

 Explore more information:
  1. Full form of  ROM
  2. Full form of GAL
  3. Full form of PROM
  4. Full form of EPROM
  5. Full form of EEPROM
  6. Full form of AWT
  7. Full form of DBA
  8. Full form of DTE
  9. Full form of DCE
  10. Full form of  DTD
  11. Full form of SGML
  12. Full form of  XML
  13. Full form of GML
  14. Full form of IBM
  15. Full form of WWW

IBM full form in computer

What is the full form of IBM?


Answer:

  • International Business Machines 

What does IBM mean?


IBM is a multinational technology and consulting organization that is a trusted brand in the IT sector. The headquarters of IBM is in armonk, new york and it is current CEO is Ginni rometty. The company manufactures computers hardware and software and offers infrastructure, consulting, and hosting services. It products devices into different categories such as a cloud, data and analysis, and cognitive and IT infrastructure.  It is a service that includes business, mobility, and networking, security, technical support service, technical support service, etc.

 Explore more information:
  1. Full form of DBA
  2. Full form of DTE
  3. Full form of DCE
  4. Full form of  DTD
  5. Full form of SGML
  6. Full form of  XML
  7. Full form of GML
  8. Full form of HTML

GML full form

What is the full form of GML?


Answer:

  • Generalized Markup Language

What does GML mean?


GML is an IBM document formatting language and that describes the document in terms of its organizational structure and content parts and their relationship. GML markup or tag is described such pars as a chapter, important sections, and less important sections, paragraphs, tables, lists, and so forth. GML is a free document creator from specific document formatting concerns such as a font specification, line spacing, and page layout required by IBM printer formatting language, script.

 Explore more information:
  1. Full form of IBM
  2. Full form of WWW

XML full form

What is the full form of XML?


Answer:

  • Extensible Markup Language

What does XML mean?


XML is used to encode the document that can be understandable by humans and machines both. A data is stored in XML format is easy to understand and easy to modify. This format was designed to trasport and store data in a specific format. There are three main things that have to keeps in your mind when you are using the XML : generality, usabiity and simplicity. XML language contains a few rules that you have to follow like opening and closing tags. 

SGML full form

What is the full form of SGML?


Answer:

  • Standard Generalized Markup Language


What does SGML mean?


SGML can be defined as the standard for defining generalized markup language. It was developed and designed by the international organization for standard. HTML was theoretically an example of an SGML that uses language until HTML 5, which browsers cannot parses as SGML for compatibility reasons. The SGML is the extended from GML and later on its extended to HTML and XML.

 Explore more information: 
  1. Full form of HTML


DTD full form

What is the full form of DTD?


Answer:

  • Document Type Definition 

What does DTD mean?


DTD is a document that defines the structure of an XML document. It is used to describe the attributes XML language precisely. It can be classified into two types namely internal DTD and external DTD. It can be specified inside a document or outside a document. DTD mainly checks the grammar and validity of an XML document. It checks that an XML document has a valid structure or not.

Explore more information:

DCE full form

What is the full form of DCE?


Answer:

  • Data Commuication Equipement

What does DCE mean?


DCE is any device that supports data transmission over a serial telecommunication link. Typically data communications equipment refers to modems, channel service unit data service units, and similar devices. The purpose of a DCE is to provide termination for the telecommunications link and an interface for connecting data terminal equipment to the link.

Explore more information:

  1. Full form of  ROM
  2. Full form of GAL
  3. Full form of PROM
  4. Full form of EPROM
  5. Full form of EEPROM
  6. Full form of AWT
  7. Full form of DBA
  8. Full form of DTE
  9. Full form of  DTD
  10. Full form of HTML
  11. Full form of SGML
  12. Full form of  XML
  13. Full form of GML
  14. Full form of IBM
  15. Full form of WWW

DTE full form

What is the full form of DTE?


Answer:

  • Data Terminal Equipment

What does DTE mean?


DTE is equipment, that acts as a source and/or destination in digital communications systems and it is capable of converting information to signals and also reconverting received signals. The piece of data terminal equipment usually does not communicate with each other, which is usually done by data communication equipment. Common examples of data terminal equipment: printer, routers, and application servers, etc.

 Explore more information:

  1. Full form of DCE
  2. Full form of OSI model
  3. Full form of TCP/IP
  4. Full form of IETF
  5. Full form of UTP
  6. Full form of UDP
  7. Full form of POP
  8. Full form of SMTP
  9. Full form of FTP
  10. Full form of LCP
  11. Full form of IMAP
  12. Full form of SLIP
  13. Full form of HDLC
  14. Full form of SDLC
  15. Full form of DCE

DBA full form in computer

What is the full form of DBA?


Answer:

  • Dataabse Administrator

What does DBA mean?


DBA is an individual or person responsible for controlling, maintenance, coordinating, and operation of the database management system. Manging, securing, and taking care of the database system is prime responsibility. DBA is a term used in legal or some business process writing. DBA helps describe an individual who runs a sole proprietor company not using his or her/his own name. The DBA helps us to establish legal ownership of that name.

SDLC full form

What is the full form of SDLC?


 Answer:
  • Synchronous Data Lik Control

What does SDLC mean?


The SDLC is a data link control which is developed by IBM in 1975. It was modified by ISO and was named by HDLC. SDLC is a subset of HDLC and includes several minor additional features, SDLC is used i wide-area networks that use leased lies to connects SNA hosts and remote terminals.

 Explore more information:
  1. Full form of HDLC

HDLC full form

What is the full form of HDLC?


Answer:

  • High-Level Data Link Control 

What does HDLC mean?


HDLC is a group of communication protocols of the data link layers for transmitting data between points or nodes. It is a data link protocol, so data is organized into frames. A frame is transmitted via the using the network to the destination that verifies its successful arrival. It is a bit-oriented protocol that is applicable for both points to point and multipoint communications.

 Explore more information:
  1. Full form of OSI model
  2. Full form of TCP/IP
  3. Full form of SLIP
  4. Full form of SDLC
  5. Full form of NCP
  6. Full form of IETF
  7. Full form of LCP
  8. Full form of UTP
  9. Full form of UDP
  10. Full form of POP
  11. Full form of SMTP
  12. Full form of FTP
  13. Full form of STP
  14. Full form of PPP
  15. Full form of STM

IETF full form

What is the full form of IETF?


Answer:

  • Interent Egieering Task Force 

What does IETF mean?


IETF is the body that defines standard Internet operating protocols such as TCP/IP called as transmission control protocol/internet protocol. The IETF is a large open international community of network operates, designers, vendors, and some researchers concerned with the evolution of internet architecture, also the smooth operation of the internet. It is open to any interested individual. IETF members are drawn from the internet society individuals and organization memberships. Standard is expressed in the form of RFC.

SLIP full form

What is the full form of SLIP?


Answer:

  • Serial Line Internet Protocol

What does SLIP mean?


SLIP is a TCP/IP implementation that has described under RFC 1055. SLIP establishes point to point serial connection which can be used in dial-up connection, serial port, and routers. It frames the encapsulated IP packets across a serail line for establishing a connection using line speed between 12000 bps and 19.2 Kbps.

NCP full form

What is the full form of NCP?


Answer:

  • Network Control Protocol

What does NCP mean?


NCP is a set of protocol forming a part of the point to point protocol. PPP is a data link layer protocol that is used to transmit multiprotocol data between two directly connected computers. PPP is composed of link control protocol, authentication protocol, and the network control protocol. NCP is used for negotiating the parameter and facilities for the network layer. For every higher layer protocol supported by PPP, and one NCP is there.





LCP full form

What is the full form of LCP?


Answer:

  • Link Control Protocol

What does LCP mean?


LCP is a part of the point to point called the PPP that operates in the data link layer. It is responsible for establishing, implementing, configuring, testing, maintaining, and terminating links for transmission. It also imparts negotiation for the set up of options and use of features by the two endpoints of the links.

Explore more information:

PPP full form

What is the full form of PPP?


Answer:

  • Point to Point Protocol

What does PPP mean?


PPP is a computer networking communication protocol of the data link layer that is used to transmit multiprotocol data between two directly connected computers. PPP has three main components like a way to encapsulate multi-protocol datagrams, a link control protocol to establish, configure and test the data-link connection, and a group of network control protocols that establish and configure different type of network-layer protocols.

 Explore more information:
  1. Full form of OSI model
  2. Full form of TCP/IP
  3. Full form of IETF
  4. Full form of SFTP
  5. Full form of UTP
  6. Full form of UDP
  7. Full form of POP
  8. Full form of SMTP
  9. Full form of FTP
  10. Full form of LCP
  11. Full form of IMAP
  12. Full form of STP
  13. Full form of SLIP
  14. Full form of HDLC
  15. Full form of SDLC
  16. Full form of DTE
  17. Full form of DCE
  18. Full form of TFTP

AWT full form

What is the full form of AWT?


Answer:

  • Abstract Window Kit

What does AWT mean?


AWT is a platform-dependent API to develop GUI or window-based applications in java.  AWT is a part of java foundation classes. It was developed by us microsystem in 1995. AWT is a GUI toolkit for a number of java ME profiles. It is heavyweight in use because it is generated by the system's host operating systems. It contains a large number of classes and methods, which are used for creating ad managing GUI.

Subscribe to: Posts (Atom)