Shielded twisted pair cable (STP) can reduce crosstalk with proper installation and maintenance. STP cables can resist signals from passing through the route coating and entering nearby wires by accident because of the special cable constructive. Here this post gives information about what are the advantages of STP over UTP to better understand this topic.
Benefits or Advantages of twisted pair cable:
- It is the least expensive medium of transmission for short distances.
- It is relatively easy to implement and terminate.
- It can be used to carry both pf the data analog and digital data.
- It turn are less likely to cause interference themselves.
- It is flexible and lightweight.
- It is easy to set up and install.
- Less susceptible to electrical interference caused by nearby equipment or uses of wires.
- If the portion of twisted pair cable is damaged it does not affect the entire network.
Drawback or disadvantages of twisted pair cable:
- Attenuation is very high.
- It offers poor noise immunity as the result signal distortion is too much more.
- STP called shielded twisted pair cable is more difficult to connect to a terminating block.
- Being this cable is thin in size and they are likely to break easily.
- Some transmission is limit.
- Susceptible to noise and interference.
- It supports lower bandwidth as compared to other media. It supports 10 Mbps up to a distance of 100 meters on a 10 base-T.
- It supports lower bandwidth as compared to other media.
What are the Benefits of STP over UTP?
STP stands for shielded twisted pair cable. It is one type of twisted pair cable. It is basically similar to the UTP. It is similar to UTP in which the wire pair are twisted around each other. Here this post gives the advantages and disadvantages of shielded twisted pair cable (STP) are listed below.
Advantages of shielded twisted pair cable (STP):
- Shielding reduces the chance of crosstalk and provides protection from interference.
- The advantages of STP over UTP is that it offers greater protection from cross talk due to shielding.
- It offers better electrical characteristics than unshielded cables.
- It can be easily terminated with a modular connector.
But one of the disadvantages of STP is that this cable is heavier and costlier than UTP and require proper grounding at both the ends.
Explore more information: