Advantages and disadvantages of conduit wiring system

Conduit wiring is a system where the cable is enclosed in metal or some plastic tubes. The conductor has insulation which is rated at the voltage required but gives no mechanical protection. Just because of cable are enclosed in a tube the circuit can be rewired ore altered as required and additional points added reasonably easily. Here this post gives some information about the advantages and disadvantages of the conduit wiring system to better understand this topic.

Advantages of conduit wiring:

  • It is waterproof wiring systems.
  • It has a long life.
  • It is a good appearance.
  • Alternation is possible.
  • It is reliable. 
  • It is durable and very popular systems.
  • PVC conduits offer a highly resistant against corrosion.
  • It will not support combustion.
  • There is no chance of fire.
  • No risk of electric shock.
  • No risk of mechanical wear and tear in a fire in case of metallic pipes.
  • Maintenance is easy.
  • It provides protection against moisture in the atmosphere.
  • The damage of cable can be replaced easily.
  • The conductor is safely secure for moisture.
  • Conduit provide protection aganist  chemicals.

Disadvantages of conduit wiring:

  • It is difficult to install.
  • The fault-finding process is very difficult.
  • More time is required for the installation of this wiring system.
  • The cost is high.
  • Risk of electrical shock.
  • installation is not easy and simple.
  • Very hard to find a defect in the wiring.
  • Very complicated to manage additional connections in the future.
  • Is burn inside any side conduit cause insulation of cable to be damaged.
  • In the case of steel conduit, It is an expensive system compared to other wiring systems.
  • The beauty of this wiring system compared to a concealed system is less.
  • In the case of a PVC plastic conduit of mechanical injury is possible.
Explore more information:


We hope that you have got a better understanding of this concept. Furthermore, any quires regarding this concept or some electrical and electronics projects give your feedback in the comment section below. 

Advantages and disadvantages of batten wiring

In this wires insulated wires are run through the straight teak wooden battens, The wooden battens are fixed on the ceiling or walls by plugs and screws. The cables are fitted onto the battens by using tinned brass links clips. This wiring system is simple and cheap as compared to other electrical wiring systems. Here this post gives information about the advantage and disadvantages of batten wiring to better understand this topic.

Advantages of batten wiring:

  • This is a simple wiring system.
  • Batten wiring system is a better long life.
  • Durable and have good strength.
  • The chance of leakage current is very rare.
  • It looks very beautiful.
  • Wiring installation is easy and simple.
  • Alternations are possible.
  • It is installed very quickly.
  • It is cheap in material costs.
  • Appearance is better.
  • Customization is easy.
  • It is strong and long-lasting.
  • Less chance to leakage current.
  • The fault is found very costly.

Disadvantages of batten wiring:

  • The risk of fire is possible.
  • After maintenance of the beauty of this wiring system is nor maintain. 
  • It is installed only for 220V.
  • The risk of mechanical injury is possible.
  • Extra cable is used for a wiring system.
  • The weather effect directly attacks this wiring system.
  • It is not suitable for outdoor wiring.
  • Some of the Heavy wires are not recommended for this wiring scheme.
  • Humidity, smoke, steam, etc directly affect wires.
We hope that you have got a better understanding of this concept. Furthermore, any quires regarding this concept or some electrical and electronics projects give your feedback in the comment section below. 

Advantages and disadvantages of cleat wiring

This type of wiring is most suitable for temporary wiring purposes such as in marriage halls, some events, etc so the most important advantage of this wiring system is it saves labour cost and installation cost. This type of wiring can be very easily installed and materials can be recovered for further use. So here this post gives information about the merits and demerits of cleat wiring to better understand this topic.

Advantages of cleat wiring:

  • It is easy to fault detection.
  • It is easy to repair.
  • This is the temporary wiring system.
  • It is the cheapest for internal wiring.
  • Alternation and addition are easy.
  • The whole wiring is replaced for a short period of time and material of wiring is used in another place if we want.
  • The inspection of this wiring is very easy.
  • All the cables are in open-air therefore fault is very easily found and replaced it very quickly.
  • Customization can be easily done.
  • Installation and dismantlement are easy and quick.
  • Material is recoverable after the dismantlement.

Disadvantages of cleat wiring:

  • It has a bad appearance.
  • It is not looking good.
  • This wiring system is not safe and durable.
  • It is a chance to shock or fire.
  • It is not a sustainable wiring system.
  • It is used only low-temperature places.
  • Wire are exposed to mechanical injury.
  • It is not suitable for domestic premises.
  • Oil and smoke are injuries to VIR insulation.
  • Quit tempory and perished quickly.
  • It is used only 220/440 V in low ambient temperature only.
  • The risk of fire is present because the cable is in open conditions.
  • Exposed to weather to be affected by humidity, rain, smoke, sunlight, oil, vapor, steam, etc.
  • this wiring system is not long-lasting.
  • After some of the duration, sag is produced in the cables.
  • The dust and smoke are directly affected on cable therefore after some duration beauty of this wiring is costly.
  • This is the temporary wiring system, it can't be used permanent wiring.
  • If the cap of a cleat tightly screws on the base then the insulation of the cable is damaged and the risk of the current leakage is occurring.

We hope that you have got a better understanding of this concept. Furthermore, any quires regarding this concept or some electrical and electronics projects give your feedback in the comment section below. 

Advantages and disadvantages of casing capping wiring

Casing capping is one of the oldest wiring systems and has been very popular and frequently used. This wiring system is one of the simplest forms of the electric wiring system. PVC insulated wire is placed in the plastic casing and all systems are covered with a cap, hence the name is casing capping. The casing is rectangular strip while the cables are run through it having grooves. This post will discuss the pros and cons of casing capping wiring system to better understand this topic.


Advantages of casing capping wiring:

  • This wiring system is way cheaper than a sheathed and conduit wiring system.
  • It looks beautiful.
  • There is no risk of mechanical shock.
  • The alternation is possible in this system.
  • It is cheaper compared to a steel conduit and sheeted wiring system.
  • It is considered as safe from smoke, dampness, and humidity.
  • Customized installation can be done very easily for this system.
  • Reduced risk of electric shock can be expected because all the cables are covered.
  • This wiring system is cheap and durable.
  • It stays safe for oil, steam, smoke, and rain.
  • If phase and the neutral wire are installed in the separate slot then repairing is easy.
  • Stay for a long time in the field due to the strong installation of casing and caping.
  • This wiring system is a strong and long-lasting wiring system.
  • Repairing becomes very easy if the phase and neutral wire are installed in separate slots.

Disadvantages of casing capping wiring:

  • Difficulty in finding some fault caused in the wire.
  • It is used up to 220V.
  • There is a high risk of the casing and caping systems.
  • This wiring system is not suitable for acidic conditions in industries.
  • There is too much risk of major fire due to short circuits because of plastic in this wiring system.
  • The risk of fire is possible.
  • The humidity is directly effected by casing and capping, therefore, this wiring system is not used for humidity places.
  • The initial cost of the system is high, so it is expensive.
  • Costly to repairing and need more materials.
  • The material can't be found easily in the contemporary.
  • The place of acid and alkaline are present this system is not suitable.
  • While ants may damage the casing and caping wood. 
Explore more information:

1. Advantages and Disadvantages of concealed conduit wiring
2. Advantages and disadvantages of cleat wiring
3. Advantages and Disadvantages of conduit wiring

We hope that you have got a better understanding of this concept. Furthermore, any quires regarding this concept or some electrical and electronics projects give your feedback in the comment section below. 

Advantages and disadvantages of concealed conduit wiring

Concealed wiring is properly named a concealed conduit wiring system. It is very laborious to install. This layout of wiring is done under the plaster of the wall of the building. Conduit pipes are buried under the plaster of the wall with GI wire inside. After, with the use of GI wires, the main PVC insulated cables are drawn through the conduit. Here this post gives information about the merits and demerits of concealed conduit wiring systems to better understand this topic.

Advantages of concealed conduit wiring system:

  • It has a long life.
  • It is the safest wiring system.
  • Maintenance is easy.
  • No risk of electrical shock, in case of proper earthing and grounding of metallic pipes.
  • There is no change in the fire.
  • There is no risk to damage cable installation.
  • Alternation is possible.
  • Some customization can be easily done according to what is our future needs. 
  • It is a waterproof wiring system
  • It is a durable and very popular system.
  • It will no support for combustion.
  • It is safe for corrosion in the case of PVC conduct and risk of fire.
  • The conductor is safely secure for moisture.
  • This wiring has a far better look.
  • It is aesthetically appealing.
  • Conduct provides protection against mechanical injury, fire, and shockproof.
  • Conduct provides protection against chemicals.
  • It is a reliable and popular wiring system.
  • Renovation can be easily performed as old wires can be easily replaced.
  • Do not hamper interior layout as conduits are concealed in the wall.
  • It can be used for humidity, chemical effect and smokey area.
  • It is a long-lasting wiring system.

Disadvantages of concealed conduit wiring system:

  • This is in an expensive system compared to other systems.
  • The extra earthing conductor is required when PVC conduct is used.
  • It is hard to find any defects in the wiring.
  • It needs an additional conduit future is cumbersome
  • PVC conduct are not suitable for temperature below -5 °C or 60 °C above 
  • Alternation is difficult.
  • Wiring installation is difficult as compared to other methods.
  • Changing the location of appliances or switches is difficult.
  • The fault-finding process is difficult.
  • Complicated to add/manage additional connections in the future.

Explore more information :
  1. Advantages and Disadvantages of casing capping wiring
  2. Advantages and Disadvantages of conduit wiring
  3. Advantages and Disadvantages of batten wiring
  4. Advantages and Disadvantages of cleat wiring 
  5. Advantages and Disadvantages of wooden casing and capping wiring
  6. Difference between Grounding and Earthing

 We hope that you have got a better understanding of this concept. Furthermore, any quires regarding this concept or some electrical and electronics projects give your feedback in the comment section below. 

Advantages and disadvantages of semiconductor devices

Semiconductor devices are nothing but electronics components. To all other electronic devices, they can be used in an electronics circuit in different combinations to do different work.

Advantages of semiconductor devices:

  • Semiconductor devices have no filaments hence there is no power needed to heat them to cause the emission of the electrons.
  • As we know the semiconductor device does not produce any humming noise.
  • Semiconductor devices have shockproof.
  • The semiconductor device is cheaper as compared to vacuum tubes.
  • The semiconductor device has an almost unlimited life.
  • The semiconductor device has a small size, so the circuits involving devices are very compact.
  • No heating is required so semiconductor devices are set into operation as soon as the circuit is switched on.
  • Semiconductor devices occupy less space on any type of printed circuit board.
  • As we know that when no vacuum has to be created in semiconductor devices they have no vacuum deterioration trouble.
  • Semiconductor devices require low voltage operation as compared to the vacuum tubes.

Disadvantages of semiconductor devices:

  • The noise level is too much higher in semiconductor devices as compared to the vacuum tubes.
  • In when we have to use the ordinary semiconductor devices cannot handle as more power as ordinary vacuum tubes can do.
  • In the high-frequency range, they have poor performance.
This topic is all about the different types of semiconductor devices include two terminals, three terminals, and four-terminal devices. We hope that you have got a better understanding of this concept. Furthermore, any quires regarding this concept or some electrical and electronics projects give your feedback in the comment section below. 

Difference between ammeter and voltmeter | Ammeter vs Voltmeter

Ammeter and voltmeter are electrical instruments and need electricity as well as a complete electric circuit to display reading. The main key difference between the ammeter and voltmeter are discussed in this tutorial on the basis of certain important factor such as connection with some uses, safety, resistance, ideal behaviour, measuring units, applications, etc. 

Before we learn about the key difference between ammeter and voltmeter first let us understand the definition of ammeter and voltmeter. 

Definition of ammeter: 


The ammeter is many more advantages of measuring the instrument which is used to measure the current in all the circuits.  It measures the small amount of current in must in mA or in microampere. The ammeter is placed in series with the measuring circuit so that the whole current of the circuit passes through it.

Definition  of voltmeter:


The voltmeter is the voltage measuring device. It is basically connected in parallel with the electrical circuit whose potential is to be measured. The connection polarity of the voltmeter is the same as that of the ammeter.

The main key difference between ammeter and voltmeter are given below.
  • The ammeter is defined as the device used for measuring the small value current flow in the circuit, while in voltmeter measure the potential difference between any two points of the electrical circuit. 
  • The ammeter representation of an ammeter circuit with A while in voltmeter the circuit denoted by a circle with V inside it.  
  • The ammeter measures the current in amperes or even smaller units mA or microampere while in voltmeter measures the difference in volts. 
  • The accuracy of the ammeter is much more as compared to the voltmeter.
  • The measuring range of the voltmeter can be increases or decreases by changing the value of resistance whereas the rage of ammeter can not be changed.
  • The resistance of the ammeter is low while the internal resistance of the voltmeter is very low so that the current from the circuit does not disturb the measuring of the voltmeter. 
  • The ammeter is connected in series with the circuit for measuring the complete current whereas the voltmeter is connected in parallel with the circuit.  
  • In ammeter, a large amount of current passes through while in voltmeter is a very small amount of current passes.
  • In ammeter low resistance to electricity so must not e connected straight across the supply while in voltmeter high resistance to electricity so e able to be connected across the supply.
  • The resistance of an ideal ammeter is zero but in resistance of an ideal voltmeter is infinity.
  • The circuit must be disconnected from the power source in order to attach the ammeter while in voltmeter circuit does not need to be disconnected to attached the voltmeter.
  • An ammeter can be created by attaching a small resistance in parallel with the galvanometer whereases in voltmeter can be created by attaching a very high resistance in series with the galvanometer.
Explore more information:

Difference between MPCB and MCCB

Motor protection circuit breakers ad moulded case circuit breakers both are low voltage AC circuit protection devices. It is used to open and close the circuit manually and interrupt the circuit automatically on the occurrence of faults. MPCB and MCCB both are used to protect against overload and short circuits. Here any query regarding this topic please give a comment below as well as any opinion regarding this topic please inform me in the comments section.

Difference between MPCB and MCCB :

  • MPCB stands for motor protection circuit breaker while in MCCB stands for molded case circuit breaker. 
  • MPCB is used to manually turn on and off electric motors and at the same time protect them from different types of faults occurring in motors while in MCCB are used in power distribution and low voltage distribution circuits as well as motors loads.
  • MPCB is specially designed for motor protection while in MCCB are specially designed for general-purpose circuit protection.
  • MPCB can protect the motor against overload, short circuit, phase loss, and under-voltage faults while in MCCB can protect the motor against overload and short circuits. This circuit can also provide under-voltage, earth faults, and phase failure faults but these features are made available with additional accessories.
  • MPCB can withstand the stating currents without interrupting the circuit while in MCCB is used as backup protection for a motor, it may interrupt the circuit if it is selected based on its full load current.
  • MPCB is maximum load current can be set based on the full load current of the motor while in MCCB is overload, short circuit and trip relay delay time can be set based on the applications.
  • MPCB is selected based on the full load current of motors and maximum possible short circuit current while in MCCB are selected based on the maximum current and maximum short circuit current interrupt safety. 
  • MPCB has an adjustable bimetallic strip for overload protection. this strip can be adjusted between two set values but the MCCB overload value of MCCB can be  40% to 100% of its rated value.
  • MPCB can protect a motor against overload and short circuit while in MCCB when used in motor protection circuit can protect against short circuit only. Hence additional overload relay and contactor.
  • A motor can be directly ON and OFF manually using an MPCB, the contactor is optional while in  MCCB contactor is a must in these cases.
  • Some MPCB comes with auto-resetting features that allow motors to resume its operation after a short period from the occurrence of overload trip while in MCCB is feature is not available.
  • Overload relay is not required for motor circuits with MPCB backup but in MCCB overload relay is required.
  • Some MPCB comes with an auto-resetting feature that allows motors to resume its operation after a short period from the occurrence of an overload trip while in MCCB feature is not available.
Explore more information:

Difference between ammeter and ohmmeter

An ammeter is an instrument used to measure the current through a circuit is connected in series with the component through which the current is to be measured whereas voltmeter is an instrument used to measure the voltage across the two ends is connected across the end of component across which the voltage has to be measured. Let us have a deep insight into the definition of ammeter, ohmmeter and key difference between them in this article. 

Definition of ammeter:

An ammeter has used for measuring the current in an electronic circuit. Electric currents are measured in amperes, hence the component which measure current is known as an ammeter. It is used to measure smaller currents, in the milliampere or microampere range.

Definition of ohmmeter:

An ohmmeter measures the basically resistance and also a continuity of electrical circuit and their components. The unit of resistance is ohms Î©. 

Difference between ammeter and ohmmeter:

  • The ammeter measures current while ohmmeter measures resistance.
  • The ammeter is connected in series but in ohmmeter is connected in parallel.
  • In ammeter, the current is measured in amperes while ohmmeter is an electrical instrument that measures electrical resistance in ohms. 
  • Ammeter used to measure smalled currents in the milliampere or some microampere range are designated as millimetres or micrometres while in micro ohmmeter is used low resistance measurement while Megaohammters measure the large values of resistance. 
  • While using an ammeter positive ad negative terminal need to be aligned with a circuit, while checking current, we do not need to take care of positive ad negative terminals while calculating resistance in an ohmmeter. 
  • The ohmmeter is very convenient the use but less accurate compare to an ammeter.
  • An ammeter is four of type permanent moving coil ammeter, moving iron ammeter, electrodynamometer ammeter, rectifier type ammeter while in ohmmeter is of three types series ohmmeter, shit ohmmeter ad multi range ohmmeter, this is the type of construction while in current category there are two types AC ammeter and DC ammeter.

Difference between MCB and RCBO

MCB stands for miniature circuit breaker while RCBO stands for a residual current circuit breaker with overload protection, this both are circuit protection devices. These devices are most commonly used in the distribution board in the office, home, theatre, commercial building, low voltage power distributions, etc.

What is MCB?


MCB is designed to operate on overload current and they can be used as protection devices for the individual circuit. MCB can also provide magnetic fault protection and short circuit protection.

What is RCBO?


As the name suggests the operating fundamental of RCBO is to operate on residual as well as overload current. RCBO is a combination of MCB and RCCB. When in some current imbalance occur the RCCB will operate ad when there is overload in the circuit breaker will operate.

Difference between MCB and RCBO :

  • MCB stands for miniature circuit breaker while RCBO stands for a residual current circuit breaker with overload protection.
  • MCB can provide protection against overcurrent and short circuit only while RCBO can provide protection against overcurrent and earth leakage.
  • MCb can not protect against earth faults while in RCBO can protect against earth fault, electric shocks that MCB may not do.
  • MCB is selected based on the load, the maximum short circuit during overload and short circuit,  RCBO is the combination of MCB and RCCB. It is selected based on the load and maximum short circuit current it ca interrupt, trip curve and maximum leakage current.
  • MCB is used to protect lighting circuits, air conditioners and other home applications RCBO is used for protection against electric shocks. Hence it is mainly used to interrupt the power to water heaters, power sockets, etc. 
  • MCB is monitoring the current flow through the line and interrupts the circuit during overload and short circuit, while RCBO is not only monitoring but the current flow through the line interrupt the circuit during overcurrent, short circuit, and earth leakage.

RCCB advantages

RCCB stands for  Residual current circuit breaker, it is nothing but quickly breaks an electrical circuit to prevent serious harm from an ongoing electric shock. Let us have a deep insight into the advantages and disadvantages given by RCCB. 

Advantages of RCCB:

  • The main purpose of RCCB is to protect the human from the residual current.
  • It is used to protect against the earth's fault as well as electrical shock.
  • It automatically disconnects the circuit when the rated sensitivity is exceeded.
  • It offers protection against voltage fluctuations as it includes a filtering device that guards against transient voltage levels.
  • It offers the possibility of dual termination both for cable and busbar connection.

Disadvantages of RCCCB:

  • RCCB does not have short circuit protection.
  • Nuisance tripping of RCCB.
  • RCD doesn't offer protection against current overloads.
  • This circuit breaker will not protect against a socket outlet being wired with its live and neutral terminals the wrong way round.
  • RCCB is a higher cost.
  • This circuit breaker will not protect against live neutral shocks, because of the current in life and neutral in balance.
  • RCCB does not protect from the overheating that strike if conductors are not properly screwed into terminals.
  • RCCB does not guarantee to operate if none standard waveform is generated by a load. It is mainly because RCCB is designed to operate on a normal supply waveform.
Explore more information:

Advantages and disadvantages of ELCB

ELCB stands for Earth leakage circuit breaker, It is one kind of safety device used for installing an electrical device with the high earth impedance to avoid shock. The main advantage of the Earth leakage circuit breaker is to stop damage to humans and animals due to the electric shock. Let us have to deep inside the information about the merits and demerits of Earth leakage circuit breaker to better understand this topic.

Advantages of ELCB:

  • This device is not sensitive to faults.
  • It is cheap and efficient.
  • It protects animals and humans from electrical shock.
  • In this process, when the installation has two connections to the earth, a nearby high current lightning strike will cause a voltage gradient in the soil, presenting the ELCB sense coil with enough voltage to cause it to trip.

Disadvantages of ELCB:

  • Failure to respond at certain conditions.
  • ELCB needs a sound earth connection, for load protection.
  • Nuisance trips.
  • Electrical leaky appliances water heater, washing, machine, and coolers may cause CKL to trip.
  • They may be tripped by the external voltage from something connected to the earthing system such as a metal pipe.
  • They do not detect a fault that doesn't pass current through CPC to earth rod.
  • They do not allow a single building system to easily split into multiple sections with independent fault protection because the earthing system is bonded to the pipework.
  • If the electrical installation earth rod is placed close to another earth of a building, then a high earth leakage current from other buildings can raise the local ground potential and cause a voltage difference across the two earth, again tripping the ELCB.
  • ELCBs introduce additional resistance and an additional point of failure into enough voltage to cause it to trip.
  • They may be tripped by external voltage from something connected to the earthing system such as metal pipes, TN-S earth or a TN-C-S combined neutral and earth. 
Explore more information:

Difference between RCCB and ELCB

ELCB measure the voltage in earth link wire or ground wire to trip whereas RCCB measure sum of currents in neutral and phase to trip. They both are different in function but not in design and speed. Let us have a deep insight into the definition of ELCB and RCCB and the difference between them in this article. 

What is ELCB?

The ELCB stands for, Earth Leakage Circuit Breaker, it is a  basically safety device is used in electrical installations with high earth impedance to prevent shock. It detects small stray voltages on the metal enclosures of electrical equipment and also interrupts the circuit if some dangerous voltage is detected.

What is RCCB?

RCCB stands for Residual Circuit Breaker, It is essentially a current sensing device used to protect a low voltage circuit in case of a fault. It contains some switch device that switches off whenever some fault occurs in the connected circuit. 

Difference between ELCB and RRCB :

  • RCCB is the new name that specifies a current operated new name to distinguish from voltage-operated while ELCB is the old name and often refers to voltage operated devices that they are no longer available and it also advised you replace them if you find one.
  • RCCB stands for residual case circuit breaker while ELCB stands for earth leakage circuit breaker.
  • ELCB is an old technology while RCCB is a new technology.
  • ELCB is connected to phase, natural as well as earth line, RCCB is connected only phase and natural line. 
  • Both are working for the same, but the thing is connectivity is the difference.
  • RCCB does not monitor the system earthing status. It monitors only the live and neutral while in ELCB ensure the system is connected on perfect earth which means ELCB sense the connectivity of earthing.
  • In ELCB cost is high compare to RCCB.
  • ELCB is not recommended over RCCB while in RCCB  is also known as the current operated ELCB.
  • ELCB detect earth faults that flow back through the main earth wire, RCCB will detect any earth faults, that's why they are using mow instead of ELCB.
  • ELCB is working based on earth leakage current while RCCB is not having sensing or connectivity of earth because fundamentally phase current is equal to the neutral current in a single phase.

You may also learn about this topic:

Difference Between isolator and circuit breaker

As we know that both isolators and circuit breakers switch to isolate a section of the power system but one point is that the isolator is an offload device while in the circuit breaker in on load device. Let us have a deep insight into what is an isolator and circuit breaker and key difference between them in this article. 

Definition of isolator:

An isolator is just like a switch, only can be operated under offload condition. It mostly used in industry-level applications. It can not protect the circuit under fault conditions. 

Definition of circuit breaker:

A circuit breaker is basically a protecting switch, it can be operated both manually as well as auto, actually. It follows the instruction of protecting devices under various fault conditions such as over current, short circuit, etc.

Difference between isolator and circuit breaker : 

  • The isolator is switch operated manually while the circuit breaker is operated automatically.
  • The isolator is an electronics device made by using MOSFET or BJT while the circuit breaker is a mechanical device that acts as a switch.
  • Isolator has a low withstand capacity as compared to that of the circuit breaker.
  • The isolator is an offload device while the circuit breaker is an on load device.
  • The isolator is meant only for interrupting the power during maintenance or repair while in circuit breaker are meant for protection of a circuit or equipment from short circuit and overload faults while they are in operations.
  • The breaking capacity of isolators is very less compared to the circuit breaker.
  • In isolator protection relay does not require while in circuit breaker protection relay control the breaker.
  • Isolator has a less cost while in circuit breaker has a high cost.
  • In isolator atmospheric air is used as arc quenching medium while in circuit breaker different kinds of a medium are used in typically atmospheric.
  • Isolator has high safety while in circuit breakers need well-trained technicians.
  • Arc quenching medium is used for isolator while in circuit breaker SF6  and vacuum atmospheric air were used.
  • Physical contact status can be seen. since they are necessary during the maintenance process while in the circuit breaker we cannot see the physical condition.
  • Isolator cuts out a portion of a substation when some fault occurred. Some other devices operate without any interruption, but in the circuit breaker know as an automatic circuit breaker which trips the entire system if any fault occurs and thus the whole system is affected.

Difference between fuse and circuit breaker

The difference between the fuse and circuit breaker are explained considering various factor like working principle, reusability, an indication of status, the requirement of the auxiliary, breaking capacity, protection, curves, its function, temperature and mode of operations.

 The most significant difference factor between fuse and circuit breaker is that lies in their operational mechanism. The fuse is a base of thermal as well as electrical characteristics of the conducting metal which is utilized in the fuse while in circuit breaker functions on the base of electromechanical principles. Let we have a deep insight into the benefits and disadvantages of fuse and circuit breaker to better understand this topic.

What is a fuse?


 Fuse is defined as an overall current protective device with a circuit opening fusible element which open when there is an overcurrent in the circuit.

What is the circuit breaker?


 A circuit breaker is a device which controls a circuit automatically manually or by remote control under normal and fault conditions like overcurrent or short circuit etc.

Difference between fuse and circuit breaker :

  • Fuse works on the principle of electrical and thermal properties of the conducting materials whereas the circuit breakers work on the electromagnetism and switching principle.
  • The fuse provides protection against only power overloads whereas a circuit breaker provides protection for both power overload and short circuit.
  • Breaking the capacity of the fuse is low as compared to that of a circuit breaker. 
  • The fuse provides both detection and interruption process. Circuit breaker performs the only interruption, a relay system is attached for detection of any fault in the circuit.
  • No auxiliary contact is required in case of fuse but in circuit breaker, auxiliary contact is required.
  • Operating time of fuse is very less about 0.002 second while operating time of circuit breaker is comparatively more than that of fuse, about 0.02 to 0.05 second.  
  • Fuse cannot be used as an ON/OFF switch while in circuit breaker can be used as an ON/OFF as a switch.
  • Fuse is only single pole version is available while in circuit breaker single and multiple pole version is available.
  • Fuses are independent of ambient temperature but circuit breaker depends on the ambient temperature.
  • The cost of the fuse is low whereas the circuit breaker is more costly.
  • Mode of operation off fuse is completely automatic but circuit breaker can be operated manually it causes nuisance and tripping. The curve of the circuit does not shift.
  • Fuses once used cannot be reused again, the circuit breaker can be reused.
  • Fused used extensively In electronic equipment draw low current while in a circuit breaker are used in power equipment such as in motors and other heavy machines which draw a large amount of current.
  • Fused can be replaced after the operation while a circuit breaker can be reset quickly after the operation.
Explore more information:


Subscribe to: Comments (Atom)