ECSTUFF4U | ONLINE ELECTRONICS, ELECTRICAL ENGINEERING KNOWLEDGE | RESEARCH | INFORMATION |
Answer:
MEO is a satellite system that is used in telecommunication systems. MEO is a satellite's orbit of the earth between 1000 and 22300 miles above the earth's surface. MEO is mainly used in geographical positioning systems and is not stationary in relation to the rotation of the earth.
Explore more information:
Answer:
HEO is an elliptic orbit with its high eccentricity. It is usually referring to one around the earth. Examples of inclined HEO orbit include molniya orbits, which a named after the molniya soviet called for communication satellites which are used them and tundra orbits.
Explore more information:
Answer:
LEO is an object, is in orbit around the earth with an altitude above the earth's surface from 160 km to 2000 kilometers. LEO is high enough to cross all the mountains. It is also high enough that atmospheric drag won't bring satellites right back home again. Satellites are commonly used for communications, military reconnaissance, spying, and other imaging applications.
Explore more information:
Answer:
GTO is a type of geocentric orbit. Which are destined for geosynchronous or called as the geostationary orbit which is always put into a GTO as an intermediate step for reaching their final orbit. A GTO is basically highly elliptic. It is perigee is typically as high as low earth orbit(LEO), while its apogee is a high as geostationary orbit. That makes it a human transfer orbit between LEO and GSO.
Explore more information:
Answer:
GSAT satellites are India indigenously developed communications satellites. Which is used for digital audio, data, and video broadcasting. The GSAT satellites of ISRO have been launched out of which 14 satellites are in service. The GSAT series of geostationary Satellites is a system developed by ISRO with an objective to make India self-reliant in broadcasting services.
Explore more information:
Answer:
INCOSPAR was set up by the government of India by Dr. Vikram Sarabhai in 1962. It emerges from the Indian space research organization in 1969. At a time the committee was part of the Tata Institute of the fundamental research center. The committee took over the responsibilities of the department of atomic energy in space science and research.
Answer:
PSLV is a third-generation launch vehicle of India. It is the first Indian launch vehicle to be equipped with liquid stages. PSLV was introduced to enable India to launch its satellites for IRS into sun-synchronous orbits. It could also be used to launch GTO satellites of a small size. During the 1994-2017 period time, the vehicle launched 48 Indian satellites and 209 satellites for customers from abroad.
Answer:
The SSLV being built by ISRO will offer affordable launch options in India. India which helps boost revenues, the space agency commercial arm, has said. currently, small satellites are being piggybacked on the bigger ones once launched using the polar satellite launch vehicle and the Geosynchronous launch vehicle. With satellites becoming smaller and launch options limited these satellites can be sent on the SSLV.
Answer:
GSLV is a satellite launch vehicle developed and operated by the Indian space organization. IGSLV used in thirteen from 2001 to 2018, with more launches planned. It was launched eleven satellites to date. It is used to lunch satellites and space objects into the geosynchronous transfer or its. It was launched the first satellite in 2001 and the most recent satellite was launched on 5 May 2017.
Explore more information:
Answer:
NASA is the USA government independent agency that works for the civilian space program as well as for aeronautics, scientific discovery, and earth and aerospace research. It was founded by the national aeronautics and space act on 1 October 1958 by the president of Dwight D Eisenhower. It deals with the development of peaceful space science technologies instead of military ones and charge of US science and technology with space exploration and aircraft.
Explore more information:
Answer:
The ISRO is the space agency of the Indian government and its headquarters in Bengaluru. ISRO was formed in 1969 with the vision to develop and harness space technology in national development. while pursuing planetary exploration and space science research. ISRO replaced its predecessor, INCOSPA, whose establish in 1962 by India's first prime minister pt Jawaharlal Nehru and great Indian scientist, Vikram Sarabhai, considered amongst the founding father of the Indian space program.
Explore more information:
Answer:
A PCO is a telephone facility located in a public place in India and Pakistan. It also another name in the UK for public telephone boxes. In India BSNL a public sector corporation has the largest installation of PCO in India. While Pakistan, PCO is provided PTCL called Pakistan telecommunication company, telecare, Dancom, etc. These companies are usually provided calling card-based domestic and international telecom services.
Explore more information:
Answer:
TMCB is a device that provides against overcurrent in the circuit. The circuit breaker uses an automatically operated electrical switch to disrupt the flow of current when an overload or short circuit is detected. Thermal magnetic circuit breakers do this using electromagnet bimetallic strips.
Explore more information:
The word monolithic is derived from the word Greek monos, meaning means a single, and lithos, meaning stone. Thus the monolithic circuit is built into a single stone or single crystal in using the monolithic ICs, and all circuit components and their interconnection are formed. So here this article gives the main key advantages ad disadvantages of monolithic IC to better understand this topic.
Advantages of Monolithic IC:
Disadvantages of monolithic ICs:
Answer:
EPLD is a type of PLD with an array of initially unconnected programmable logic devices. This type of PLD needs its array of logic devices to be configured or programmed by the user electrically. PLD is used to build a reconfigurable device that can be used in a variety of applications depending on their programming.
Explore more information:
What are the Applications of CPLD?
Explore more information:
Answer:
IEEE is a non-profit organization of engineering professionals, consist of engineers and students. IEEE is best known for developing standards for the computer science and electronics industry. IEEE platform also arranges and manages conferences and offers a platform for publication of research and works. IEEE contains 1000 employees to assist in its activities.
Answer:
IDE is a programming environment that contains a lot of things in a single package. It is actually a software application that provides comprehensive facilities to computer programmers for use of software development. IDE combines all the basic tools that developers need to write or test software.
Explore more information:
The SATA stand called serial advanced technology attachment. It is also called a serial ATA. It is a form of bus connections which your computer requires to attach various main storage drives like the hard drive or the called SSD, to the motherboard present in it. So here this article gives the main key advantages ad disadvantages of SATA to better understand this topic.
SATA stands for Serial ATA, while PATA stands for parallel ATA. They both are referred to two different ways of encoding transporting the data electronically. The data transfer speed of SATA is higher than PATA. So here this article gives the main key difference between SATA and PATA to better understand this topic.
PATA is a bus interface used for connecting secondary storage devices like hard disks, optical drives, etc. It was first introduced in the year 1986 by western digital and Compact. It was later replaced by SATA.
Definition of SATA:
SATA is a bus interface that connects hard disks and optical drives. SATA was introduced in 2001 after PATA was slowly declining its demand by serial ATA working group. SATA has more benefits than PATA making its demand more.
Answer:
PATA is motherboard has many components in it. Each component has its own functionality. There are cables used for different purposes in a motherboard and PATA is one of the advanced technology. PATA is also an advanced technology attachment is a bus interface used for connecting secondary storage devices like hard disks, optical drives to the computer system. The functionality of PATA is to used to transfer the data.
Explore more information:
Answer:
SATA is an interface used to connect the mass storage device to the motherboard of a computer. SATA is also called a serial ATA, an interface for transferring data between a computer's central circuit board and storage devices. The very first version of SATA 1.0 is released in August. It is a replacement for PATA and is much better in use.
Explore more informaton:
What is HTTP?
HTTP is the most popular protocol in use today. It is the communication standard used y your web browser in order to communicate with the server of the website that you are viewing.
Answer:
EIDE is an improved version of the called integrated drive electronics(IDE) drive interface that provides faster data transfer rates than the original standard. While the original IDE drive controller supported transfer rates of 8.3 Mbps while the EIDE can transfer data up to 16.6 Mbps, which almost twice as fast. The EIDE can be ambiguous since it technically refers to an ATA standard known as ATA-2 or fast ATA standard. So, the EIDE ATA-2 and fast ATA may be used synonymously.
Explore more information:
HTTP(Hypertext transfer protocol) is a distributed, collaborative, and hypermedia information system application protocol. HTTPS(Hypertext transfer protocol Secure) is secure version of HTTP that encrypts all client's server communication with SSL/TLS. it is a major difference between them. So here this article gives the main key Difference between HTTP and HTTPS to better understand this topic.
HTTP is a protocol, it is prescribed order and syntax for presenting information, which is used for transferring data over a network. Most information that is sent over the internet, including the website content calls and some data, uses the HTTP protocol. basically, there are two main kinds of HTTP messages: requests and responses.
What is HTTPS?
HTTPS is a highly advanced ad secure version of HTTP. HTTPS uses TCS to encrypt HTTP requests and responses. HTTPS is still slightly different, more secure, and more advanced. It provides encrypted secure identification of a network server.
Answer:
What does SCSI mean?
SCSI is a set of American national standard institute, standard electronic interfaces that allow personal computers to communicate with peripheral hardware such as some device like disk devices, tape drives, CD ROM drives, printers ad scanners faster and with more flexibility than previous parallel data transfer interfaces.
Explore more information:
Answer:
ATA is a type of disk drive that integrates the drive controller directly on the drive itself. Computers can use ATA hard drives without a specific controller to support the drive. The motherboard must still support an ATA connection, but a separate card is not needed.
Explore more information:
HTTP is an acronym for Hypertext Transfer Protocol, and it serves as the foundation of the global web. It specifies the format of messages exchanged between web browsers and web servers, also outlining the expected behavior of a web browser in response to a specific request from another web browser.
Learn more about the Features of SMTP