Precautions of Batten wiring

Some precautions of batten wiring include: 

  • If the cable is passing underwater pipes or walls then metal pipes are used.
  • Use the correct size of clips, if large clips are used then the beauty of wiring is not maintained.
  • Always installed the batten to the hight of 5 above the ground.
  • Use bridge joint when crossing of cables is required.
  • Always varnish the batten before installation.

Precautions of conduit wiring

Some precautions of conduit wiring include:

  • The metal pipes or conduits are terminated in a metal-clad board with a smooth bor brass bush or ring brass bush.
  • Always draw the exact number of the wires into the conduit.
  • Always select the correct size of the conduit.
  • When curve the conduit then elbows or bends are used.
  • Select the exact routes before the installation of the conduit. 
  • When the exact large length of the conduit run then must provide the inspection point on this conduit.
  • If two or more than two conduits are run in parallel then multiple saddles must be used for wiring.
  • Before drawing the cable in conduit, make sure that there is no moisture is present in the interior of the conduit.
  • Always use the steel wire to draw the cable through steel or PVC conduit.
  • In the case of a steel conduit, the sharp edge of the conduit must be smooth.
  • Use the correct size of the saddle according to the diameter of the conduit.

Precautions of cleat wiring

Some precautions of cleat wiring include:

  • Cleat wiring is not suitable for those place where smoke, steam, dust, and risk mechanical injury is present.
  • The cable is lying straight in cleats.
  • Do not install this wiring in as specially for stores and flammable places.
  • The cap is not tightly screwed on the base because of cable is damaged and not as loosely screw that as a result, the cable is producing sag.
  • If the cable is passing through under the water pipes, wall or roofs then cables are always passing through met conduits.
  • Switches, sockets, cut out, ceiling rose and lamp holders are always installed on round wooden blocks.
  • The distance between branch circuits for single-phase supply is not less than 2.5 cm and for sub-main 4cm minimum.
  • Always use the wooden bushing on each end of the conduit circuit.

RCCB full form

What is the full form of RCCB?

Answer: 

  • Residual Current Circuit Breaker 

What does RCCB mean?

RCCB is a differential current sensing device used to protect for a low voltage circuit in case of a leakage fault. Sometimes it is called a residual current device. RCCB is even when MCB is already provided because there are two types of electrical faults that are quite dangerous.


Explore more information:

Precautions of casing capping wiring

Some precaution of casing capping wiring system include:

  • Always use the porcelain tube or conduit when the cable is passing through the walls.
  • Always use the porcelain cleat or washed between the wall and casing.
  • The width of the groove of casing capping wiring is about 6mm.
  • All the joints are made, in the junction boxes and also at switches and sockets.
  • Completely varnished the casing and capping before installation.
  • Always use the bridge point when cables are crossing each other.
  • When using this wire, do not insert the phase and neutral wires in one groove.
  • There is no gap present between the casing and caping uses.
  • Fit the caping on the casing tightly and also have screwed.
  • VIR and PVC pipe must be used. 

Basic house wiring rules

The first rule is to remember that basic wiring can be too dangerous. Never attempt to do it without a good understanding of how it works and safe work practice. Here we have to explain some basic housing wiring rules.

If you are handling the wiring yourself follow all the safety precautions from the beginning to the end of the project to help ensure the safety of your family, your neighbor, and your property. It will also guarantee longevity.

Here we explain some basic housing wiring rules:

  • Carry out the wiring on the distribution system.
  • Don't allow wiring to run above the ceiling.
  • The fixed switchboard at the proper height.
  • Use earth wire of proper gauge.
  • Make use of copper conductor.
  • Always replace wires that show signs of deteriorations.
  • You should never touch any plumbing or gas pipes while working with electricity and its because they are may time used to ground electrical system.
  • A proper plan to ahead for any type of wiring.
  • Don't exceed the load on a circuit.
  • If you overload outlets or extension cords it's going to create a fire hazard.
  • Never utilize damaged wiring or elements.
  • Before you do any electrical work make sure that the power is off at the breaker.
  • A voltage tester is a cheap life insurance policy when working with high voltage.
  • It is easier and faster to complete your wiring if you make sure you have got all the tools you require and always use the suitable tools.
  • Do you conceal conduit wires is used in wall, you will never spics wires together and conceal them within a wall without a junction box, it is a fire hazard. So put in an accessible junction box for the connected wires.
  • When you work with electricity. You should never touch or try repairing any electrical appliances or circuits with wet hands. 
  • Never use an aluminum or steel ladder because if you are working on any receptacle at hight in your home. An electrical surge will ground you and the whole electric current will pass through your all body. so use bamboo.
  • Never use any equipment with frayed cords, and damaged insulation or some broken plugs.

Explore more information:

HDD full form

What is the full form of HDD?


Answer:

  • Hard Disk Drive


What does HDD mean?


HDD is a non-volatile memory hardware device that controls the reading, writing of the hard disk. It can be connected to a system using  ATA, SCSI or SATA cable along with a power cable. The hard disk drive is commonly used as the main storage device in files and can be found in desktop, mobile devices, consumer, electronics and enterprise storage.

Biometric system advantages disadvantages

Biometric technology is more popular now a day, all over the world. It is a system that uses information about a person to identifies that person. in recent years that are many different types of biometric techniques are available. The biometric system relies on specific data about unique biological traits in order to work effectively.  Nowadays it will use all types of security systems. It will be used in many government sectors, hospitals, medicals, companies, schools, colleges, malls, etc. Some biometric techniques like a fingerprint, face, iris, palm, a voice, it will be discussed in our next post. Here we have to discuss some important advantages and disadvantages of biometric systems to better understand that, the user why biometric important nowadays.

Advantages or merits of the biometric system:

  • Improved security.
  • It is easy to install and setup up the system.
  • Improved customer experience.
  • It cannot be forgotten or lost.
  • Reduced operational costs.
  • This system is user-friendliness.
  • Less human error.
  • 100% accountability for all activities.
  • These system attributes are almost impossible to forge or duplicate
  • Difficult to steal so this system is making authentication is very simple.
  • This system directly authenticates to the person.
  • Users can not share retina or fingerprint, voice, while password and user easily forgot. 
  • Biometric work with your physical traits such as fingerprints, palm, vein, retina, iris, amongst others that will always serve accurately anywhere and anytime.
  • A biometric system is a scalable solution for all types of problems. Nowadays it will be used in the government sector, hospitals, companies, schools, colleges, etc.

Disadvantages or demerits of the biometric system:

  • Environment and usage can affect the measurement
  • The system is not 100% accurate.
  • This system is sometimes expensive.
  • Often view as inconvenient.
  • Require integration and additional hardware
  • Cannot be reset once compromised
  • It is used may feel violet.
  • Faulty equipment cause delays.
  • Time-consuming to collect the biometric data from people.
  • We can reset the password but we can't change iris, finger, face. This all is fixed, so sometimes it is difficult.
  • Some biometric machines are less than perfect and lots of mistakes happen sometimes.
  • Biometric is a highly technical and complex system that makes up the whole process.
  • Some biometric systems like iris scan can go through scanning is too many difficulties.
  • Some biometric modalities need some additional hardware integration which is costly, inconvenient and too much complex. It is hard to manage this type of modalities.

Some essential tips to avoid MCBs tripping

One very common cause for the breaker to trip is a loose electrical connection and can easily be corrected by tightening them, SO try to reset it once by turning it to off position and then back to the on position. Not even an MCB but all the circuit breaker can trip at regular intervals due to any of the following reasons:


Why MCB trip Frequently? 


The most important point is overload circuit, short circuit, and Ground fault, that three-point of  MCB trip frequently.

1. Overload circuit:

The overloading is the most common reason for the circuit breaker trip. It indicates that the household has many heavy power appliances that are being used at the same time on the same circuit. When we have to use too much heavy power appliances are used together on the same circuit, there is more electricity creating an overload.

2. Short circuit:

A short circuit is one of the most dangerous problems in life, and it can happen at any time and anywhere. In all the cases, almost the problem of circuit breaker tripping is also caused by short circuits. This problem happens when a wire or phase touches another wire or phase or touches a neutral wire in the circuit. A high current flows when these two wires touch creating heavy current flow, more than the circuit can handle this flow. 

3. Ground fault:

This is also the biggest problem of MCB tripping. Faulty ground wiring can lead to hot wires touching the ground wire. When this problem happens, it can cause the circuit breaker to trip. 


Here some essential trip to avoid MCB tripping:

  • We should unplug all the devices when it's not in use.
  • We should make sure that none of your appliance cord is damaged or broken.
  • We should be aware of how many appliances are plugged in during hot or cold weather.
  • The most important point to avoid using the extension cable and the power strips if you have few outlets.
Explore more information:

Why MCB is better than fuse?

The most important advantage of using MCB abbreviation called a miniature circuit breaker is that the power supply can be resumed almost immediately. MCB can be changed over the switch needs to be pushed backed to the On position. While in the case of the fuse, the whole wire will have to be replaced first and there are also have some disadvantages of fuse like it has low breaking capacity, and it has slow compared to other circuit breakers. So here this post gives information about several advantages of MCB over fuse or we can say that why we have to use MCB better than a fuse.

Here we have to list several advantages of MCB over fuse:

  • MCB is more sensitive to current than a  uses fuse.
  • MCB is very simple to resume to the supply.
  • MCB is better and safer from the fuse.
  • In the while uses of MCB, the faulty zone of an electrical circuit can be easily identified.
  • MCB provides a better interface than a fuse.
  • MCB is reusable whereas a fuse needs to be replaced.
  • MCB has less maintenance and less replacement cost compare to fuse.
  • MCB doesn't have any wire, so it can be used at any time.
  • It better than fuse because of when the heavy current passed these switches which automatically off.
  • Handling  MCB is electricity safer than handling a fuse. In the case of MCB.
Explore more information:

For comparison to other circuits breaker

MCCB full form

What is the full form of MCCB?

Answer:

  • Molded Case Circuit Breaker

What does MCCB mean?

MCCB is a circuit breaker, it is a trip device assembled in a molded case. The case functions both as both an outer wrapper and to retain the proper position the breaker internal components. This breaker can automatically cut off electric power in case of overload and short circuit. It is meant for higher-rated current and is commonly used in most industrial applications. 

Explore more information:
  1. CFL bulb full form
  2. LED bulb full form
  3. Full form of DVP
  4. MCB full form
  5. USB full form
  6. LiFi full form
  7. LCD full form
  8. OLED full form
  9. CRT full form
  10. CCFL full form
  11. HDD full form

How many types of MCB are there?

MCB is classified according to the tripping over the rage of fault current. It is most important for you to know what type of MCB trip curve to decide what type to use for different appliances for the correct electrical system. Before learning about type first understand the trip curve. Trip curve is essentially nothing but the maximum current that particular MCB can withstand. Here there are six different types of MCB, which are A, B, C, D, K, and Z. Let us check detailed information one by one below.

Types of MCB: 


Type A trip:

These type of MCB are highly sensitive to short circuit and are used for the protection of semiconductor devices.  MCB with class A trip characteristics trip instantaneously when the current flowing through it reaches between 2 to 3 times the rated current. 

Type B trip:

This type of trip off when the current flow is 3-5 times the actual flow and These MCB finds a use for cable protection.

Type C trip:

Type is C trip is most suitable for domestic and residential application ad electromagnetic starting with a medium starting current. this type of trip is off when the current flowing through it reaches between 5 to 10 times the rated current. 

Type D trip:

Type D MCB has high resistance, MCB with high-class D trip instantaneously when the current flowing through it reaches between above the 10 to 20 times the rated current. It is most suitable for inductive and motor loads with high starting currents.

Type K trip:

This type of  MCB withstand up to 8 to 12 times the initial charge and thus can be used for bulky load devices. It is suitable for inductive and motor load with high inrush currents.

Type Z trip:

This type of MCB is most suitable for highly sensitive to short circuit and that is used for the protection of highly sensitive devices such as semiconductor devices. MCB with class Z trip, the current flow through it reaches between 2 to 3 times the rated current. 

MCB full form

What is the full form of MCB?

Answer:

  • Miniature Circuit Breaker

 What does MCB mean?

MCB stands for Miniature circuit breaker, It automatically operated on the electronic switch. It detects the fault by detecting an excessive amount of current flow in the circuit and breaker the circuit as soon as possible. Fuses need to be replaced after a short circuit while MCB just has to be reset and it will start functioning. MCB offers greater operational safety and is convenient to use.


Explore more information:

What is electrical wiring

As we all know the wiring system is dangerous for life, it is a potentially dangerous task if done improperly. There are many different types of electrical wiring systems. Let us look at the different types of electrical wiring that are used in home electrical and some domestic properties. Wiring technology will help to understand a few basic terms used in describe wiring. Electrical wiring is one type of conductor., which is a material that conducts electricity. In our home application, most of the wire is used in the insulated, meaning that they are wrapped in a nonconductive plastic coating. 

Let we have to understand the basic home electrical wiring and domestic electrical wiring types: 

Conduit wiring:

 Conduit wiring is provided by mechanical protection and also provides electrical safety to persons and property and provides convenient and accessible ducts for the conductor. As well designed electrical raceway system has adequate capacity for future expansion and readily adaptable to changing some conditions. 

Casing capping wiring:

 Casing capping wiring is one of the oldest methods for the wiring system and it has been very popular is frequently used. In today's world, after post introduction of the conduit or sheathed wiring system, it is preferred for the wiring system. 

Concealed conduit wiring:

 The concealed conduit wiring system is the most popular, most common type of house electrical wiring used. Conduit wiring is a professional way if wiring a building and domestic wiring

Batten wiring system:

 This is when a single wire or some group of wire is laid over a wooden batten. The wires are held to the batten using a brass clip and spaced at an interval of 10 cm for horizontal runs and 15 cm for vertical runs.

 Lead sheathed wiring system:

 Lead sheathed wiring system that uses conductors that are insulated with VIR and that are covered with an outer sheath of lead aluminum alloy which contains about 95% almost lead. This metal sheath gives protection to cables from cables mechanical damage, atmospheric corrosion, and moisture.

 Cleat wiring:

Cleat wiring comprises of PVC insulated wires or ordinary VIR that are braided ad compounded. This type of wiring is most suitable for temporary wiring purposes such as in marriage halls, some events, etc so the most important advantage of this wiring system is it saves labor cost and installation cost. This type of wiring can be very easily installed and materials can be recovered for further use.

Features of SSD

SSD called solid-state drive, It became more attractive as an enterprise for data storage devices like desktop, laptops, servers, PCs, etc. While the hard disk is smarter, faster, reliable today than ever before, SSD has several features that make them viable alternatives. 

Basic features of solid-state drive (SSD) are given below:


Mobility: SSDs are smaller as well as lighter than previous uses of drives. It is possible to create today's ultra-thin laptop and other mobile dives.

Data transfer rate: The data transfer rate for SSD is between 100-500 Mb's/ sec.

Random access time: Since the data is accessed directly from the flash memory it is almost lag-free.

Noice: SSDs are silent, In SSD drive having no moving part s, it has no noise.

Fragmentation: The fragmentation is irrelevant for SSDs.

Power consumption: SSD drives consume 30 to 60%. It is less energy compared with HDD drive, saving an odd 6 to 10 watts power.

Energy efficiency: No moving part and fast data read and write speed mean that SSD draws less power both while working and while idle.

Data access time: SSD is lightning fast and generally the SSD 80-100 times faster than HDD drive. 

 Easier to carry: SSD has lightweight components or moving parts, they are more mobile-friendly and are much better suited for constant traveling.

Increased variety in size: Solid-state drive can be purchased in a variety of sizes like 2.5", 1.8", and 1.0". With such characteristics, the solid-state drive can easily and quickly replace the hard disk drive.

 Explore more information:
  1. SATA vs SSD
  2. Advantages and disadvantages of SSD

SSD full form

What does SSD mean?

Answer:

  • Solid State Drive

What is the full form of SSD?

SSD is a mass storage device that stores the data on non-volatile memory. Solid-state means that doesn't require moving part. while in HDD, called hard disk drive, there are no moving parts to an SSD. There are many more advantages of SSD as that it is the faster access time, low power consumption and noiseless operations. SSDs are also known as flash drives or solid-state disks. Solid-state drive connected to the computer through standard IDE or SATA connections. 

Advantages and disadvantages of solid state drive

SSD stands for solid-state drive, There is a trend that has been seen in the use of SSD replacing the traditional drive in many types of electronic devices. It became more attractive as an enterprise for data storage devices like desktops, laptops, servers, PCs, etc. While the hard disk is smarter, faster, reliable today than ever before, SSD has several features that make them viable alternatives. There are as many advantages to doing this as there are disadvantages or demerits making it difficult to choose a clear winner. So let us take a closer at the merits and demerits given below.

Advantages of solid-state drive(SDD):

  • A solid-state drive consumes less power as compared to a hard disk drive. 
  • Though the cost of hardware is lower with HDDs, the cost of bandwidth is much lower with SSDs.
  • SSDs allow faster booting of computers as the drive is not required to spin up thereby improving the performance of the computer.
  • SSD produces less noise because it uses computer chips and there are no moving parts. Since it is non-mechanical, there is virtually no more noise.
  • Solid-state drive lack motors, they generate less heat, unlike HDDs. This is an important feature for people using laptops as it allows them to use their laptops with more comfort o their laps for longer time periods with the least worry about burns.
  • The solid-state drive has better-reading ad and writing speed. Data reading and writing to flash chips occur instantly in SSD, allowing the SSDs to have better reading and writing speeds.
  • The constant read performance feature makes file fragmentation simple and a nonissue in an SSD. Data can be accessed anytime in an instant regardless of where it is stored.
  • SSD has no moving parts, It can keep the data safe in the event of dropping it. SSD is no mechanical failure in higher mechanical reliability. The SSD is lighter than an HDD and is resistant to shock and temperature change.

Disadvantages of solid-state drive(SDD):

  • One of the biggest disadvantages of a solid-state drive is the cost. SSD costs are much more than a conventional hard disk drive.
  • The SSDs are using DRAM technology and require more power, unlike conventional HDDs. These drives continue to consume power when the system starts while a conventional hard disk drive will not.
  • A solid-state drive is highly expensive and solid with a hefty price tag, unlike conventional HDDs.
  • Some of the solid-state drives especially those using NAND memory flash chips can be written only for a limited number of times. Solid-state drive using DRAM technology does not come with such a limitation, they cost more.
  • Some of the less expensive solid-state drives, especially the MLC-based types, come with slower write speeds when compared to read speeds. These speeds are relatively lower write speed on the conventional hard disk drive.
  • In recent times, the use of SSDs has increased leading to various issues. These issues have to e resolved before obtaining optimal performance from SSDs.
  • The Windows operating system that was used before Windows 7 were not optimized for SSDs. It reduced the drive performance and shorten its lifespan.
  • The SSD write/ erase cycle is limited. An HHD can stand up to a 1 to 5 million write cycle, whereas, An SSD averages 100000 cycles, meaning a decrease in the SSD performance over time. This limitation in write cycles causes more trouble.  
  • The inability to recover old data is one of the biggest disadvantages of SSD.
  • SSDs can access data quickly, they usually take more time to save data. The device on the SSD must first delete the old data in order to write the new one. This is a big disadvantage, which mostly goes unnoticed by an average user, for data systems that are involved in the transfer of large amounts of data.
  • In this drive, the data is permanently and completely deleted from the drive, though this is an advantage in terms of data security, still, permanent data deletion could lead to irreparable consequences in certain events where there is no backup for deleted data.
  • Due to the unique file system structure of an SSD, data extraction can be an extremely difficult and lengthy process. 
Explore more information:


ELCB full form

What is the full form of ELCB?


Answer:

  • Earth Leakage Circuit Breaker

What does ELCM mean?


ELCB is a circuit breaker, which is used for electrical installation with high current impedance to prevent shock.  ELCB is designed to interrupt the power to the circuit for which they were installed to protect whenever there is leakage of current from the phase to earth is higher than the circuit breaker rated current.
Explore more information:

Full form of CCTV

What is the full form of CCTV?

Answer:

  • Closed Circuit Television

What does CCTV mean?

CCTV also called video surveillance. It is a system where all the elements like the display monitors, video cameras, recording devices are directly connected. It is used to monitor a specific area that is quick to detect and require continuous monitoring and the area where there is not much attention and seldom someone who can keep observation most of the time.  CCTV is very useful for crime because it monitors all the activities and records them. It is also helpful for traffic monitoring by detecting congestion and notice accidents. 

Advantages and disadvantages of CCTV

CCTV stands for closed-circuit television, It one of the most recent advancements in modern technology has to be the creation of the CCTV camera system. CCTV helps prevent personal as well as property crime by monitoring, recording and transmitting some images. CCTV cameras can act as a deterrent to crime and increase the chance of arresting those who carry out crimes, so it will most important from the criminal cases. Here this post gives some pros and cons of CCTV cameras to better understand this topic.

Advantages of a CCTV camera:


  • CCTV will be used for criminals, missing people are foud, ad traced ad accidents prevented with the use of CCTV. 
  • Households feel safer and more protected if they have CCTV security systems installed in their homes. If you want a safe and best camera then we at Optosafe offer temporary CCTV towers & site security, they have a variety of CCTV cameras and use the latest technology. 
  • CCTV cameras can monitor a large area.
  • Business ad with them livelihoods are protected from theft and monetary loss by the use of CCTV security systems. It monitors your business from anywhere.
  • Members of the public who know that CCTV is continuously monitoring a hospital waiting room is less likely to assault staff. 
  • CCTV camera provides evidence and gather all clues.

Disadvantages of  CCTV camera:


  • It is expensive to purchase cameras and also other equipment needed for the CCTV system. 
  • It can also be expensive to keep the technology upgrade.
  • It can be hacked also.
  • The image isn't always clear, it is normally black or white.
  • If you have a small business, this cost should be factored into your annual budget.
  • The primary disadvantage of CCTV cameras is the issue of instruction of privacy.
  • It can make people uncomfortable and breach privacy.
  • It has to be licensed in use in public.
  • CCTV camera aren't effective in stopping crime as it happens, you will need to pair it with other security systems such as an alarm system, to make sure that you are fully protected from crime.

Subscribe to: Comments (Atom)