Page

▼

31 December 2021

DD-WRT full form

 What is the full form of DD-WRT?

Answer:

  • Dresdenn Wireless Router

What does DD-WRT mean?

DD-WRT is a Linux-based open-source operating system available as a firmware upgrade for many wireless routers, and some routers come pre-installed with DD-WRT. DD-WRT is a network monitoring tool and a scheduler that is frequently used to improve the performance of older routers. In addition to normal router configuration, DD-WRT also serves as a network monitoring tool and a scheduler. It can also reboot the router if internet access becomes slow, and it can even overlock the router for gamers.



on

28 December 2021

EAP full form

What is the full form of EAP?

Answer:

  • Extensible Authentication Protocol 

What does EAP mean?

The EAP is an authentication framework used in LANs and dial-up connections. EAP is primarily used in wireless communication to authenticate clients and a wireless LAN. EAP as a point-to-point LAN data communication framework supports a variety of authentication mechanisms, such as one-time passwords, smart cards, public-key encryption authentication, and digital certificates.


on

Full form of ISP

What is the full form of ISP?

Answer:

  • Internet Service Provider

What does ISP mean?

ISP is a company that offers internet access and services to individuals and businesses. In addition to internet access, ISP may offer software packages, email accounts, and a personal website or home page. ISPs can host websites for businesses as well as build them themselves. ISPs are all linked to one another via network access points, which are public network facilities on the internet backbone.



on

L2TP full form

What is the full form of L2TP?

Answer:

  • Layer Two Tunneling Protocol

What does L2TP mean?

L2TP is used by internet service providers to enable virtual private networks. To ensure security and privacy, L2TP must use an encryption protocol to transmit data through the tunnel. Most L2 data types can be transferred using L2TP over the internet between an L2TP access concentrator and L2TP network server. This allows for the encapsulation and transmission of a point-to-point protocol link layer across the internet.


on

PPTP full form

 What is the full form of PPTP?

Answer:

  • Point to Point Tunneling Protocol

What does PPTP mean?

PPTP is a networking protocol used to connect to the virtual private network. These are secure networks that can be accessed via the internet, allowing users to connect to a network from anywhere. This is beneficial for people who need to connect to another network from one location to another.


on

SSTP full form

What is the full form of SSTP?

Answer:

  • Secure Socket Tunneling Protocol

What does SSTP mean?

SSTP is a type of virtual private network tunnel that allows PPP traffic to be routed through an SSL/TLS channel provides transport-level security by negotiating keys, encrypting data, and verifying traffic integrity. Microsoft created the technology to replace the less secure PPTP or L2TP/IPsec options in windows.

on

26 December 2021

Router vs Access point

What is a router?

A router is a device that allows messages and information to be routed or directed between computers. The Router communicates via wires or radio signals. It is the router's responsibility to ensure that message reach their intended destination. To send messages, the router uses the IP address in the same way that we use our home address. It is also the router's responsibility to ensure that messages or information do not spread to other computers and to prevent traffic.

What is an access point?

An access point is a radio receiver/transmitter that allows a wireless connection to be established. it is typically the direct link between a wired and wireless system. it is the interface through which all of your clients can connect to your LAN. As an example, consider an access point to be a type of antenna. You can share your internet connection with everything around you if you have one  It is similar to a portal or an open door.  Advanced features are available on modern access points. Some of these features include security features and the ability to prevent different wireless devices from ever seeing each other.

Router vs Access point | Difference between router and access point | 

  • The router is a device that sends and receives messages between computers, whereas access points are interconnection points that connect computers.
  • Only the router has a traffic management function, allowing messages and information to flow freely between computers.
  • The router is the only device that can serve as a DHCP server.
  • Although both router and access point use the same security such as WEP, WPA, 8021x, and TKPI, the router uses the NAT protocol.
Explore more information:

on

25 December 2021

WAP full form

 What is the full form WAP?

Answer:

  • Wireless Application Protocol

What does WAP mean?


WAP is a technical standard for gaining access to information via a mobile wireless network. A WAP browser is a web browser for mobile devices that uses the protocol, such as mobile phones. WAP improves wireless interoperability and allows for instant connectivity between wireless devices and the internet.

on

HDMI vs Display port : Which is best?

What is HDMI? 

High-definition multimedia interface (HDMI) is the acronym for High-Definition Multimedia Interface HDMI is a simpler and more precise method of data transmission between components. HDMI is a video link that can be used instead of DVI or component video. This system consists of digital television with HDMI inputs and HDMI-output components.

What is a Display port?

DP stands for display port resembles HDMI in appearance, but it is a connector found on PCs rather than TVs. It still supports high-definition video and audio, but the standards are slightly different.

HDMI vs Display port  | Difference between HDMI and DP:

  • HDMI is 100' for 1080p signals, DP officially 10'.
  • HDMI 30' for 4K signals, 
  • HDMI is an active cable that can be used for longer runs, DP is longer cables exist, but maximum resolution may.
  • The top bandwidth of HDMI is 21.6 Mbps, while the HDMI is10.2 Gbps.
  • The display port is open while the HDMI is licensed.
  • Display port is expensive required for longer runs compared to HDMI.
  • In the market, the PC world is used a Display port, while the HDMI market is consumer electronics. 
Explore more information:

on

22 December 2021

NVR vs DVR | Difference between NVR and DVR

Both NVR and DVR are recording devices used to record videos onto hard drives with the difference that DVRs are compatible with analog or semi-digital cameras while the NVR is primarily used to record video in IP cameras. They appear to be identical but they differ in how they use cabling to connect to cameras.

What is DVR?

DVR stands for A digital video recorder (DVR) is a type of recording device that digitizes video and stores it on hard drives rather than videotapes. It is necessary to digitize and compress video signals in order to store as many days' worth of video feed as possible. DVR-based security systems play an important role in alarm verification and security assessment. The digital video images are stored on hard discs similar to those found in personal computers, with storage capacities measured in gigabytes. It offers a low-cost but effective method of storing compressed video files. They primarily record analog or coax-based cameras.

What is NVR?


NVR stands for a network video recorder, it is an electronic recording device that converts digital or analog cameras to IP cameras via a network server. The digital data is then transmitted to a network in accordance with the TCP/IP transport protocol and recorded by a network video recorder. It is a self-contained system that includes a computer, software, storage, and multipoint power over an ethernet switch. NVR is similar to DVR in that they are a plug-and-play device, but they are used with IP cameras rather than analog cameras.

NVR vs DVR | Difference between NVR and DVR:

  • NVR stands for a network video recorder, while DVR stands for a digital video recorder.
  • NVR is mainly used for recording data from IP cameras wirelessly over a network, while the DVR is mainly used for recording data form recording data from analog cameras or coaxial-based cameras.
  • NVR uses ethernet cables as transmission cables, while the DVR uses coax cables as transmission cables.
  • NVR has higher recording quality than a digital video recorder, while the DVR has lower recording quality than a network video recorder.
  • NVR system setup is easier as compared to DVR, while the DVR system setup is tougher as compared to NVR.
  • NVR is paired with IP cameras with resolutions ranging from 2MP to 12MP or higher, while the DVR is paired with analog coax-based cameras with a resolution of 2MP maximum.
  • NVR camera cost is higher, while the DVR camera cost is lower.
  • NVR signal stability depends upon the internet working, DVR is signal stability is independent upon the internet working.
  • NVR needs higher operating costs than DVR, while DVR needs lower operating costs than NVR.
  • In the NVR system, the wireless or single ethernet cable is used for power & data, while in the DVR system both the power cable and audio/video cable are needed.
  • NVR can be placed anywhere with network access, while the DVR can not be placed anywhere as it is limited by the coax cable.

on

AIR full form

What is the full form of AIR?

Answer:

  • All India Radio

What does AIR mean?


AIR has been known as akashvani. It is India's largest public radio station and a division of Prasar Bharti. It is the world's leading radio broadcast in terms of the various spoken languages and the scope of cultural and socioeconomic diversity that this represents.



on

20 December 2021

Isotopes vs Isomer | Difference between Isotopes and Isomer

What are Isotopes?

The properties of atoms of the same element can differ. This distinct atom of the same element is referred to as isotope. They differ from one another by having a different of neutrons, Because the neutron number varies, so does the mass number. The number of protons and neutrons in the same element isotopes is the same. The relative abundance of different isotopes is expressed as a percentage value.

What is Isomer?

Isomer is a distinct compound that shares the same molecular formula, Isomer comes in a variety of forms. There are two types of isomers: constitutional isomers and stereoisomers. Butane is the most basic alkane to exhibit constitutional isomerism. Constitutional isomers are isomers in which the connectivity of atoms in molecules differs.

Isotopes vs Isomer | Difference between Isotopes and Isomer :

  • An atom of the same element is referred to as an isotope. Isomers are distinct compounds that share the same molecular formula.
  • Isotopes differ from one another based on the number of neutrons, whereas isomers differ based on atom arrangement.
  • Isotopes of a single element have the same chemical behavior but may have different physical properties. Isomers with the same chemical formula have chemical and physical properties that differ. 


on

19 December 2021

UDS full form in electrical

 What is the full form of UDS?

Answer:

  • Utility Distribution System

What does UDS mean?

All electrical and plumbing requirements for your commercial kitchen appliance should be met by a UDS. The plumbing and electrical connections are housed ina two-compartment raceway designed specifically for your application.

on

WORM full form

What is the full form of WORM?

Answer:

  • Write Once Read Many

What does WORM mean?

A computer system worm is a type of malware that replicates itself and infects other computers while remaining active on infected systems. A computer worm replicates itself in order to infect uninfected computers. It frequently accomplishes this by utilizing parts of an operating system that are automatic and unnoticed by the user.


on

UART full form

 What is the full form of UART?

Answer:

  • Universal Asynchronous Receiver Transmitter

What does UART mean?

UART is a hardware communication protocol. When properly configured, UART can work with a wide range of serial protocols that involves the transmission and reception of serial data. Data is transferred bit by bit using a single line or wire.



on

SPDT full form

 What is the full form of SPDT?

Answer:

  • Single Pole Double Throw

What does SPDT mean?

An SPDT switch has only one input and can connect to and switch between outputs. This means that it has one input and two output terminals. In a circuit, a single pole double throw switch can perform a variety of functions.


on

NCT full form in electrical

 What is the full form of NCT?

Answer:

  • Neutral Current Transformer

What does NCT mean?

The NCT is connect the transformer neutral to the earth. The CT output is used for REF which means that REF only protects the transformer winding from the earth faults.


on

AHU full form

 What is the full form of AHU?

Answer:

  • Air Handling Unit

What does AHU mean?

As a part of a heating, ventilating, and air conditioning system, An AHU is used to recondition and circulate air. The AHU's primary function is to take in outside air, re-condition it, and supply it as fresh air to a building. Because all exhaust air is removed, the indoor air quality is acceptable. Depending on the required temperature of the reconditioned air, the fresh air is either heated or cooled by a recovery unit or heating coil.


on

18 December 2021

VRF full form in networking

 What is the full form of VRF?

Answer:

  • Virtual Routing and Forwarding

What does VRF mean?


VRF is an IP-based computer network technology that allows multiple virtual routers to coexist as instanced or virtual router instances within the same router. A VRF may exist on one or more physical or logical interfaces, but none of the VRF share routes. only packets between interfaces on the same VRF are forwarded.

on

OSPF vs BGP | Difference between OSPF and BGP

BGP and OSPF are two popular routing protocols. The excels at dynamic routing in a large network, and OSPF provides more efficient path choice and faster convergence. So here this article gives the difference between OSPF and BGP to better understand this topic.

What is OSPF?

The OSPF is an open shortest path first protocol is a type of internal gateway protocol. The interior gateway protocol working group was formed in order to create an IGP based on the shortest path first algorithms for use in internet protocol networks. It makes use of link-state routing. The OSPF protocol was developed in response to the limitations of the RIP protocol, which had limited capability of serving large heterogeneous internetworks. OSPF is a state routing protocol that can work within a hierarchy. The autonomous system is the highest level and the largest entity in the hierarchy. OSPF makes a call to the routers in the hierarchical area to send link state advertisements.

Related terms: HDLC Vs PPP

What is BGP?

The BGP stands for border gateway protocol is an external gateway protocol used to exchange internet routing information. The BGP could connect any internetwork of autonomous systems by using an arbitrary topology. It simply necessitates that each autonomous system has at least one router capable of running BGP, which must connect to at least one other autonomous system.

Related Article: Difference Between HDLC and SDLC

OSPF vs BGP | Difference between OSPF and BGP:

  • OSPF stands for open shortest path first, while the BGP stands for border gateway protocol.
  • OSPF is the implementation of OSPF is easy, while the BGP is implementation is difficult.
  • OSPF is a fast concurrence, while the BGP is a slow concurrence.
  • OSPF is also called an internal gateway protocol, while the BGP is called an external gateway protocol.
  • OSPF internet protocol is used, while the BGP transmission control protocol is used.
  • OSPF is a type of hierarchical network topology or design, while the BGP is the type of mesh topology or design.
  • OSPF works in 89 port number, while the BGP work in 179 port number.
  • OSPF is a link-state type, while the BGP works in a vector-state type.
  • OSPF Dijkstra algorithm is used, while the BGP is the best path algorithm is used.
  • OSPF prefers the fastest path rather than the shortest path, while the BGP is preferred the best path.
on

12 December 2021

RIP full form in networking

What is the full form of RIP?

Answer:

  • Routing Information Protocol

What does RIP mean?


The RIP is a dynamic routing protocol that finds the best path between the source and destination network by using hop count as a routing metric. It is a distance-vector routing protocol with an AD value of 120 that operates on the OSI model application layer. The port number 520 is used by RIP.

Explore more information:

on

IS-IS full form in networking

What is the full form of ISIS?

Answer:

  • Intermediate System to Intermediate System

What does ISIS mean?

The interior gateway protocol IS-IS routing protocol is standardized by the internet engineering task force and is widely used in large service provider networks. IS-IS can also be used in very large enterprise networks. IS-IS is a link-state routing protocol with high scalability and fast convergence. IS-IS, like state routing protocol with high scalability and fast convergence. IS-IS like all link-state protocol makes excellent use of network bandwidth.

Explore more information:

  1. RIP full form
  2. EIGRP full form
  3. OSPF full form
  4. VDS full form
  5. RFC full form
  6. HMAC full form

on

OSPF vs RIP | Difference between OSPF and RIP

RIP, despite being the most widely used protocol with the lowest overheads, cannot be used in larger networks. OSPF outperforms RIP in terms of transmission cost and is better suited for larger networks. OSPF also has the highest throughput and the shortest queuing delay. So here this article gives the OSPF vs RIP to better understand this topic.

What is OSPF?

OSPF stands for Open shortest path first is an IGP algorithm with a link-state and a hierarchical structure. It is an improved version of RIP that includes features such as multipath routing. Least cost routing, and load balancing. Is the primary metric for determining the best path is the cost.

What is RIP?

RIP stands for routing information is a direct implementation of distance vector for the local network. Every 30 seconds, it sends an entire routing table to all active interfaces. The only metric for describing the best path to a remote network is hop count, which can be as high as 15. It prevents routing loops by limiting the number of hop counts allowed in the path.

OSPF vs RIP | Difference between OSPF and RIP:

  • OSPF stands for open shortest path first, while the RIP stands for routing information protocol.
  • OSPF works on the Dijkstra algorithm, while the RIP works on the bellman ford algorithm.
  • OSPF is a link-state protocol and it analyzes different sources like the speed, cost, and congestion while identifying the shortest path, while the RIP is a distance-vector protocol and it uses the distance or hops count to determine the transmission path.
  • OSPF is basically used for larger size organizations in the network, while RIP is basically used for smaller size organizations.
  • In OSPF, there is no such restriction on the hop count, while the RIP allows a maximum of 15 hops.
  • OSPF is networks are classified as areas, sub-areas, autonomous systems, and backbone areas here, while the RIP is networks are classified as areas and tables here. 
  • OSPF is a more efficient routing protocol than RIP, while RIP is not a more intelligent dynamic routing protocol.
  • OSPF calculates the metric in terms of bandwidth, while the RIP calculates the metric in the terms of hop count.
  • OSPF works for IP protocol, while the RIP uses UDP protocol.
  • OSPF is administrative distance is 110, while the RIP administrative distance is 120.

on

11 December 2021

OSPF vs EIGRP | Difference between OSPF and EIGRP

EIGRP and OSPF are interior gateway routing protocols that interact with routers to aid in the selection of routes for data transfer or sharing.  EIGRP was a distance vector routing protocol, whereas OSPF was a link-state protocol. So, in order to better understand this topic, this article compares OSPF and EIGRP.

What is EIGRP?

EIGRP is an acronym for Cisco's interior gateway protocol, which operates on a dual network. It is used to distribute Cisco's vector protocol, which operates on dual. It's used to send data from one router to neighboring routers in the same area. Despite its complexity, it is simple to configure and run in both small and large networks. It was created to address the shortcomings of traditional distance vector routing protocols like IGRP and RIP, which were difficult to scale to meet the network's needs.

What is OSPF?

OSPF, which stands for open shortest path first, is a routing protocol that is similar to EIGRP, but it is an open IETF standard that can be used and deployed in a variety of networks. The OSPF protocol was designed with the goal of developing a link-state protocol that is more efficient and scalable than RIP. When OSPF runs over IP, it uses protocol 89, similar to how TCP, which runs on top of IP, uses protocol 6. It uses a reliable mechanism for transportation rather than a transport protocol like TCP.

OSPF vs EIGRP | Difference between OSPF and EIGRP:

  • OSPF stands for open shortest path first, while the EIGRP stands for enhanced interior gateway protocol
  •  In terms of backward compatibility with order routers, EIGRP is the superior option to OSPF.
  • The OSPF necessitates meticulous planning of the area, whereas the EIGRP does not, it fact it is ideal for a multivendor environment.
  • EIGRP is the only protocol that supports unequal path load balancing, whereas OSPF does not.
  • OSPF provides better service provider and data center support because it is widely used in traditional systems, and it also facilitates the sharing of routing information.
  • OSPF is a link-state protocol, whereas EIGRP is a hybrid protocol.
  • The OSPF has an administrative distance of 110, while the EIGRP has an internal administrative distance of 90 and an external administrative distance of 170.
  • OSPF is a Dijkstra link-state protocol, whereas EIGRP is a dual distance vector protocol.
  • OSPF is an IETF open standard, whereas EIGRP is a Cisco proprietary standard.
  • OSPF necessitates a high CPU and memory requirement, whereas EIGRP necessitates a lower CPU and memory requirement.

on

8 December 2021

EIGRP full form

What is the full form of EIGRP?

Answer:

  • Enhanced Interior Gateway Routing Protocol

What does EIGRP mean?

The EIGRP is a network protocol that allows routers to exchange information more efficiently than network protocol such as the interior gateway routing protocol or the border gateway protocol. Cisco efforts in the 1990s to address the limitations of this protocol resulted in EIGRIP. for example, if network linked failed, BGP was slow to find an alternate path, making it difficult to support cisco's globally distributed workforce.

Explore more information:



on

OSPF full form in networking

 What is the full form of OSPF?

Answer:

  • Open Shortest Path First

What does OSPF mean?

OSPF is a link-state routing protocol that uses its own shortest path first algorithm to find the best path between the source and destination routers. OSPF is a protocol developed by the internet engineering task force as a part of the IGP, which aims to move packets within a large autonomous system or routing domain.

on

7 December 2021

TER full form

 What is the full form of TER?

Answer:

  • Total Internal Reflection

What does TER mean?

When a light ray travel from a denser medium to a rarer medium with an angle of light incidence greater than a critical angle, the incident ray is reflected back to the same medium. TER is the name given to this phenomenon. 


on

6 December 2021

VDS full form

 What is the full form of VDS?

Answer:

  • Virtual Dedicated Server

What does VDS mean?

VDS is cloud infrastructure as a service offering that allows users to provision a separate server over the internet. It has the same functionality and resources as an in-house server but is managed by a cloud service provider on a rental basis.




on

3 December 2021

VLAN vs VPN | Difference between VLAN vs VPN

Both VLAN and VPN may be excellent solutions to your needs. It all depends on the functionality and level of security you require. A VLAN is useful if you manage an organization and want to divide your existing LAN into smaller chunks for better control.

What is VLAN?

VLAN  stands for virtual local area network is a collection of devices on one or more local area networks that are configured to interact with each other at the data link layer as if they were in the same physical location, or as if they were in the same broadcast domain.

What is VPN?

VPN stands for virtual private network, It is a technology that allows for the secure extension of a private network over a public network. It is most commonly associated with remote access to a company's network resources.

VLAN vs VPN | Different between VLAN and VPN:

  • Companies use VLANs to consolidate devices spread across multiple physical locations into a single broadcast domain. VPNs are used to securely transmit data between two offices of the same company or between offices of different companies. Individuals use it for their personal needs as well.
  • A VPN subcategory is a VLAN. VPN is a technology that creates a virtual tunnel over the internet for secure data transmission.
  • A VPN is a more advanced, but more expensive, option that provides encryption and anonymity.  A VLAN is useful for splitting a network into logical sections for better management, but it lacks the security features of a VPN.
  • A virtual local area network eliminates the need for routers as well as the costs associated with router deployment. A VPN improves a network's overall efficiency.
  • In an insecure online environment, a VPN is used. When one of two devices cannot establish an external connection, a VPN is usually used to connect them. Prior to granting access, it is necessary to obtain special permission.

Explore more information:
  1. VPN vs Antivirus
  2. VPN vs TOR
  3. Difference between firewall and proxy
  4. VPN vs firewall
  5. VPN vs Citrix
  6. Difference between VOIP and PBX
  7. VPN vs MPLS
  8. VPN vs VPS
  9. VPN vs proxy
  10. VPN vs DNS
Thank you for reading this article, If you have any queries regarding this article on VLAN vs VPN  then feel free to do comment and give suggestions in the comment section below. 
on

RFC full form

 What is the full form of RFC?

Answer:

  • Request For Comments

What does RFC mean?

RFC is a formal internet engineering task force document that is the result of the committee drafting subsequent review by interested parties. Some RFCs are merely informative. The final version of an RFC that is intended to become an internet standard becomes the standard, and no further comments or changes are permitted. However, subsequent RFCs that supersede or elaborate on all or parts of previous RFCs can bring about change.

Explore more information:

  1. Full form of EVPN 
  2. Full form of VTEP
  3. Full form of VXLAN
  4. Full form of VLAN
  5. Full form of VTP
  6. Full form of PAP
  7. Full form of RADIUS
  8. Full form of PSN
  9. Full form of EOP
  10. Full form of COP
  11. Full form of HMAC



on

2 December 2021

BLE full form

 What is the full form of BLE?

Answer:

  • Bluetooth Low Energy

What does BLE mean?


BLE is low-power Bluetooth personal area network technology designed for internet-connected machines and appliances. Bluetooth LE, also knowns as Bluetooth, smart, was introduced in the Bluetooth 4.0 specification as an alternative to Bluetooth classic. Bluetooth LE, like its predecessor, uses frequency hopping wireless technology in the 2.4 GHz unlicensed radio band to connect the nearby devices.


on

28 November 2021

HMAC full form

 What is the full form of HMAC?

Answer:

  • Hash Message Authentication Code

What does HMAC mean?

HMAC is a type of message authentication code that uses a cryptographic hash function and a secret cryptographic key. As with any MAC, it can be used to verify both the data integrity and the authentication of a message at the same time.

Explore more information:

  1. Full form of EVPN 
  2. Full form of VTEP
  3. Full form of VXLAN
  4. Full form of VLAN
  5. Full form of VTP
  6. Full form of PAP
  7. Full form of RADIUS
  8. Full form of PSN
  9. Full form of EOP
  10. Full form of COP
  11. Full form of RFC


on

PAP full form

 What is the full form of PAP?

Answer:

  • Password Authentication Protocol

What does PAP mean?

PAP is a link to validate users.  PAP authentication requires the calling device to enter the username and password. If the credentials match with the local database of the called device or in the remote AAA database then it is allowed to access otherwise denied.

Explore more information:

  1. Full form of HMAC
  2. Full form of EVPN 
  3. Full form of VTEP
  4. Full form of VXLAN
  5. Full form of VLAN
  6. Full form of VTP
  7. Full form of RADIUS
  8. Full form of PSN
  9. Full form of EOP
  10. Full form of COP
on

RADIUS full form

 What is the full form of RADIUS?

Answer:

  • Remote Authentication Dial-In User Service

What does RADIUS mean?

RADIUS is a client-server networking protocol that runs in the application layer. A RADIUS server and RADIUS clients are used in the RADIUS protocol. A RADIUS client is a networking device that authenticates users such as a VPN connector, router, or switch. A RADIUS server is a service that runs in the background on a UNIX or Windows server. It allows you to store user profiles in a centralized database. If you have a RADIUS server, you can control who can connect to your network.

Explore more information:

  1. Full form of PAP
  2. Full form of EVPN 
  3. Full form of VTEP
  4. Full form of VXLAN
  5. Full form of VLAN
  6. Full form of VTP
  7. Full form of PSN
  8. Full form of EOP
  9. Full form of COP
on

27 November 2021

Full form of PSN

 What is the full form of PSN?

Answer:

  • Packet Switched Network

What does PSN mean?

A PSN is a type of computer communication network in which data is grouped and sent in small packets. It allows data are grouped and sent in small packets. It allows data or network packets to be sent between a source and destination node via a network channel shared by multiple users and/or applications.

Explore more information:

  1. Full form of PAP
  2. Full form of RADIUS
  3. Full form of COP



on

26 November 2021

COP full form in networking

 What is the full form of COP?

Answer:

  • Connection-Oriented Protocol

What does COP mean?


A COP is a networking protocol used to establish a data communication session in which endpoint devices use preliminary protocols to establish end-to-end connections before delivering the subsequent data stream in sequential transfer mode.




on

EOP full form

 What is the full form of EOP?

Answer:

  • Ethernet Over Power

What does EOP mean?

EOP is a technology that allows network data to be sent over power lines in a building. An EOP adapter is plugged into a wall outlet, and an ethernet cable from your modem or bridge is plugged into the adapter LAN port. After that network devices can be plugged into EOP adapters located in wall outlets throughout the building.

Explore more information:

  1. Full form of VTEP
on

EOS full form

 What is the full form of EOS?

Answer:

  • Electro-Optical System

What does EOS mean?

EOS is a company that provide electro-optical tracking systems in the aerospace and defence markets. The company specialises in aerospace by employing its own instruments and sensor to detect, track classify and characterise objects in space. These electro-optic systems are appropriate for both military and commercial space applications.

on

BGP full form

 What is the full form of BGP?

Answer:

  • Border Gateway Protocol

What does BGP mean?

BGP is a gateway protocol that allows autonomous systems on the internet to exchange routing information. As network interacts with one another, they require a means of communication. Peering is used to accomplish this. Peering is made possible by BGP without it, networks would be unable to send and receive data from one another.

on

DCI full form

 What is the full form of DCI?

Answer:

  • Data Centre Interconnect

What does DCI mean?

DCI is a networking market segment that focuses on the technology used to connect two or more data centres so that they can share resources. There are numerous options for DCI connectivity, and choosing the best one is dependent on a variety of factors such as the location of the data centres. The distance between data centres, bandwidth and availability requirement, the capabilities of local service provides security concerns.

Explore more information:

  1. Full form of EVPN 


on

EVPN full form

 What is the full form of EVPN?

Answer:

  • Ethernet Virtual Private Network

What does EVPN mean?

EVPN is an overlay control plane that provides virtual connectivity between different layer  2/3 domains on an IP or MPLS network. Using a layer 2 virtual bridge, an ethernet VPN connects dispersed customer sites. An EVPN, like other types of VPNs, is made up of customer edge devices that are linked to providing an edge router.

Explore more information:

  1. Full form of VTEP
  2. Full form of VXLAN
  3. Full form of VLAN
  4. Full form of VTP
  5. Full form of PAP
  6. Full form of RADIUS
  7. Full form of PSN
  8. Full form of EOP
  9. Full form of COP
  10. Full form of HMAC


on

25 November 2021

VTEP full form

 What is the full form of VTEP?

Answer:

  • Virtual Tunnel End point

What does VTEP mean?

Overlay network based on VXLAns transport frame after encapsulating them as VXLAN packets. In this network, an entity known as the virtual tunnel endpoint performs encapsulation and de-encapsulation.VTEP can be implemented in your overlay network as virtual bridges in a hypervisor server, VXLAN specific virtual applications, or switching hardware capable of handling VXLANs.





on

VXLAN full form

 What is the full form of VXLAN?

Answer:

  • Virtual Extensible Local Area Network

What does VXLAN mean?

VXLAN is a proposed encapsulation protocol for running an overlay network over the existing layer 3 infrastructure. To support elastic compute architectures an overlay network is a virtual network built on top of existing network layer 2 and layer 3 technologies. VXLAN will allow network engineers to more easily scale out a cloud computing environment while logically isolating cloud apps and tenants.

Explore more information:

  1. Full form of VTP
on

24 November 2021

VLAN full form

 What is the full form of VLAN?

Answer:

  • Virtual Local Area Network

What does VLAN mean?

A VLAN is a customized network built from one or more local area networks. It allows a group of devices from different networks to be combined into a single logical network. As a result, a virtual LAN is created that can be managed in the same way that a physical LAN is.

Explore more information:

  1. Full form of VNI
on

VTP full form

 What is the full form of VTP?

Answer:

  • VLAN trunking Protocol

What does VTP mean?

VLAN is a Cisco proprietary protocol that allows networks to send network functionality through all of the switches in the domain. This method eliminates the need for multiple VLAN configurations throughout the system.

Explore more information:

  1. Full form of TCP/IP
  2. Full form of SLIP
  3. Full form of HDLC
  4. Full form of SDLC
  5. Full form of NCP
  6. Full form of IETF
  7. Full form of LCP
  8. Full form of UTP
  9. Full form of UDP
  10. Full form of POP
  11. Full form of SFTP
  12. Full form of TFTP
  13. Full form of SMTP
  14. Full form of FTP
  15. Full form of STP
  16. Full form of PPP
  17. Full form of ARP
  18. Full form of RARP
  19. Full form of  GARP
on

GARP full form

 What is the full form of GARP?

Answer:

  • Gratuitous Address Resolution Protocol

What does GARP mean?

Requests for the GARP detect duplicate IP addresses. A GARP request is a broadcast request for the IP address of the router. If a router sends an address resolution protocol request for its own IP address and receives no ARP response, the router-assigned IP address is not used by other nodes. If the router sends an ARP request for its own IP address and receives an ARP reply, the router-assigned IP address is already in use by another node.

Explore more information:

  1. Full form of TCP/IP
  2. Full form of SLIP
  3. Full form of HDLC
  4. Full form of SDLC
  5. Full form of NCP
  6. Full form of IETF
  7. Full form of LCP
  8. Full form of UTP
  9. Full form of UDP
  10. Full form of POP
  11. Full form of SFTP
  12. Full form of TFTP
  13. Full form of SMTP
  14. Full form of FTP
  15. Full form of STP
  16. Full form of PPP
  17. Full form of ARP
  18. Full form of RARP


on